542968
123
Zoom out
Zoom in
Previous page
1/123
Next page
ADDITIONAL INSTRUCTION MANUAL ENGLISH C76_EN
The following function is added to the DP2x camera. This instruction manual explains the
additional function. Please refer to this additional instruction manual along with the DP2x User’s
Manual.
CAPTURE PRIORITY MODE
When the Drive Mode is set to Single, the shutter may not release immediately due to image
processing. However, by setting the Drive Mode to the new “Capture Priority” function, it will
enable the shutter to release continuously until the buffer is full. Therefore, it is possible to shorten
the time between taking photos.
How to set up:
Select from the Drive Mode in Quick Set Menu (P.3 4 ) or [ Capture Settings] (P. 26 )
[Drive Mode][ Capture Priority].
When the Capture Priority Mode is set, the CP
Timer and number of shots remaining before
the memory buffer is full will be displayed on
the bottom right corner of the LCD monitor. A
CP countdown timer will begin when the first
picture is taken.
CP TIMER
NUMBER OF SHOTS
REMAINING BEFORE
MEMORY BUFFER FULL
While the camera is in Capture Priority Mode, image processing will start once the buffer is full. If
you stop taking pictures before the buffer is full, image processing will start after passing the
predetermined time automatically. This time can be set in the [ Timer setting] menu.
The Timer setting can be set in [ Capture Settings] (P. 2 6 ) [ Timer setting].
It is possible to select from following.
5 sec., 10 sec.(Default), 30 sec., 60 sec.
By doing the following while the CP Timer is in operation, the CP Timer will be reset and begin the
countdown again from the predetermine time.
Press the shutter button halfway
Press the
Button
Press the Button
Press the Button
Magnify the display while in MF mode
Change to other Exposure Modes
While the CP Timer is in operation, it is possible to start image processing immediately by pressing
the button.
WARNING!!
z When the Drive Mode is set to the Capture Priority Mode, the following functions cannot be used.
Interval timer
Image with Sound
Save My Settings
Load My Settings
Capture a custom white
balance image
z If Auto Bracketing is set, the Drive Mode is set to Single Capture mandatorily.
z While CP Timer is in operation, LCD Sleep and Auto Power Off will not operate.
z While CP Timer is in operation, it is not possible to change the Drive Mode. After finishing the
image processing, please change the Drive Mode.
z While CP Timer is in operation, it is not possible to change to the review mode. Please press the
button once to complete the image processing and then press the button again to switch
to review mode.
z If the battery level is low or the capacity of the card is full, image processing will start automatically
regardless of the CP Timer setting.
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sigma DP2X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sigma DP2X in the language / languages: English as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sigma DP2X

Sigma DP2X User Manual - German - 123 pages

Sigma DP2X User Manual - French - 123 pages

Sigma DP2X User Manual - Spanish - 123 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info