When the camera is switched on for the first time,
select a language on the display. Press
buttons and confirm the language by pressing the
button. After selecting a language, input the
date and time on the display. For the details of
settings, refer to the instructions in “SETTING THE
TIME
AND
DATE”
on
the
page
26
of
the
instruction
manual, from the section number
6
onward.
NOTICE OF FUNCTION CHANGE (firmware version 2.00 or later)
The following new functions were added to the dp0 Quattro camera with the new
Firmware update (Firmware version 2.00 or later).
WARNING!!
After the firmware update, the order of the [LIST OF MENU FUNCTIONS] (P.30)
will be different.
SFD MODE (SUPER FINE DETAIL)
By recording several pictures with different exposures and combining them using
SIGMA Photo Pro, delicate pictures with a wide dynamic range and low noise can
be generated.
When shooting in SFD Mode, fix the camera on a secure tripod. If the lens
incorporates OS (Optical Stabilizer), turn off the OS.
The composition result in SFD Mode cannot be checked in the camera.
The file captured in the SFD mode will have an extension of .X3I.
1
Select [On] from [Capture Settings] (P.28) →[SFD Mode].
When SFD Mode is on, the camera settings are fixed as follows, and the
selection becomes limited.
Exposure Mode
A, M mode
ISO Sensitivity ISO100
Drive Mode
Single Capture
Self Timer 2 sec.
Self Timer 10 sec.
Image Quality RAW
Image Size HIGH
2
Press the shutter button ‘‘half-way’’ to return to shooting mode. (The icon will
be displayed on the color LCD monitor.)
3
When the shutter is pressed, seven frames are taken automatically.
The SFD frames can be generated in SIGMA Photo Pro. For details, please refer
to HELP in SIGMA Photo Pro.
In the file taken in SFD Mode, the original X3F files can be extracted with SIGMA
Photo Pro. For details, refer to HELP in SIGMA Photo Pro.
CAUTION !!
In SFD Mode, Auto Bracketing, Custom Bracketing, and Flash shooting cannot
be used simultaneously.
When playing the file taken in SFD Mode in the camera…
The composition result in SFD Mode cannot be checked in the camera. The file is
played as follows in the camera.
During a standard single-frame view, frames are played in an order of under
exposure to over exposure. The icon at the upper right section of the image
indicates the sequential number of the image.
1st Frame
(under exposure)
►►
4th Frame
(appropriate exposure)
►►
7th Frame
(over exposure)
On the contact sheet view, the images with the standard exposure are shown in
the thumbnail. The icon is indicated in the thumbnail.
CAUTION !!
When deleting files exposed in SFD Mode, it is not possible to delete files
independently. Instead, all files are deleted.
It is possible to save files in DNG format.
DNG is the RAW image data that is developed by Adobe Systems Incorporated. It
is not possible to develop it on SIGMA Photo Pro, so it is necessary to use the
software that is compatible with DNG files (depending on the specifications, there
might be some software that may not support the DNG files taken by SIGMA dp
Quattro).
It is not possible to record the image data in DNG and JPEG simultaneously.
It is not possible to adjust the White Balance of DNG files.
It is not possible to select the following color modes when the file format is set to
DNG.
[CINE], [Sun R.], [For G.], [Fov B.], [Fov Y.]
It
is
not
possible
to
change
the
Color
Mode
Detailed
Setting
when
it
is
set
as
DNG.
It is not possible to set Custom Bracketing when it is set as DNG.
For DNG files, it is not possible to use the function to develop RAW data inside
the camera.
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sigma dp0 Quattro at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sigma dp0 Quattro in the language / languages: English as an attachment in your email.
The manual is 0,18 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.