620381

Siemens RWB29 Programmer Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
Daily Programming instructions for the Siemens
RWB29 Programmer.
RWB29 Controls
MENU/SELECT
RESET
ON
WHEN LIT
EXTEND
ADVANCE
BACK/EXIT
UP & DOWN
Introduction
This leaflet will give you easy to follow instructions to allow you
to set your RWB29 Programmer to the Daily,
(same ON/OFF times each day) program.
Contents
• How do I change/set the clock?
• How do I change/set the ON/OFF times?
• How do I review the current ON/OFF times?
• What do the switching options mean?
• How do I select my Switching Options?
• How do I change summer and winter times?
• How do I set my holiday program?
• How do I activate my holiday program?
• What do the buttons do?
To commence programming first press the reset button using a
ballpoint pen or similar tool the display should show as next page.
To make it easier to follow the buttons you should be using are
coloured grey.
Display will flash as shown at first installation
RWB29 Daily
Mon Tue Wed
Thu Fri Sat Sun
12:00
PM
2P
How do I change/set
the clock?
• Press top middle button
display shows
• Alter time using +/-
buttons to scroll
• When correct time is shown press
left hand button ENTER
• Press right hand button EXIT
display shows
SET THE TIME
ENTER
+
/- BACK
12:00
PM
SET TIME
SELECT EXIT
3:37
PM
MENU
3:37
PM
HW
CH
OFF
MAN
OFF
MAN
How do I change/set the
ON/OFF times?
• Press left hand button MENU
• Press top middle button
until SET PROGRAM is shown
Press left hand button SELECT
display will show SET CH
• Press left hand button SELECT
display will show
MENU
3:37
PM
SET PROGRAM
SELECT EXIT
3:37
PM
SET 1st ON
SELECT BACK
CH
8:30
AM
3:37
PM
HW
CH
OFF
MAN
OFF
MAN
To change 1st ON time for CH
press SELECT, time will flash,
change times by using +/- ,
when desired time is in the display
press ENTER
display will show
• Repeat as above until last OFF
time for CH is entered
display will show
press middle top button SET HW is
shown, repeat as above until all
HW times have been entered,
press BACK, then press EXIT to
return to MENU
SET THE TIME
ENTER
+
/- BACK
12:00
PM
SET CH
SELECT BACK
CH
10:30
AM
3:37
PM
SET 1st OFF
SELECT BACK
CH
10:30
AM
3:37
PM
How do I review the current
ON/OFF times?
• Press left hand button MENU,
press top middle button
until REVIEW PROG is shown
• Press left hand button SELECT
display shows
Press VIEW
• 1st ON time for Central Heating
(CH) will be shown
REVIEW PROG
SELECT EXIT
CH PROGRAM
VIEW BACK
3:37
PM
HW
CH
OFF
MAN
OFF
MAN
VIEW 1st ON
BACK
CH
10:30
AM
• Press top middle button
1st OFF will be shown
• Continue above two actions until
all times have been reviewed
press right hand button BACK,
press top middle button .
Display shows HW PROGRAM
• Press left hand button VIEW, press
top middle button , Ist on time
for (HW) Hot Water will be shown
continue pressing top middle
button until all HW times have
been reviewed
• Press right hand button BACK,
twice, then press right hand
button EXIT
(this will return you to MENU)
VIEW 2nd OFF
BACK
HW
11:30
PM
REVIEW PROG
SELECT EXIT
3:37
PM
MENU
3:37
PM
HW
CH
OFF
MAN
OFF
MAN
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RWB29 Programmer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RWB29 Programmer in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info