555848
5
Zoom out
Zoom in
Previous page
1/8
Next page
Siemens Building Technologies CE2N2462E / 09.12.1998
Landis & Staefa Division 5/8
the actual, the attenuated and the composite outside temperature as well as the adjust-
able heating limit.
Flow and boiler temperature: with a detector LG-Ni 1000
at 0 °C
Outside temperature: with a Ni or NTC detector; the controller identifies the type of
detector used
Room temperature: with a room unit
The controller is equipped with a plug-in type time switch for entering a 24-hour or
weekly heating program. Backup is ensured.
The following choices are available:
Analog 24-hour time switch
Resolution of switching points: 15 minutes
Shortest on or off times: 15 minutes
Analog weekly time switch
Resolution of switching points: one hour
Shortest on or off times: two hours
Digital time switch
Any of these three types of time switches can also be fitted at a later time.
Changeover of operating mode and room setpoint as well as room temperature read-
justment with the QAW50 room unit
Overriding of setpoints and heating program with the QAW70 room unit
Changing the operating mode with an external switching contact (refer to "Mechanical
design")
The RVP200/210 is comprised of controller insert, which houses the electronics, the
power section, the output relays and all operating elements, and the base, which carries
the connection terminals. The operating elements for the end-user are located behind a
transparent cover.
Override
2462Z02
3
2
1
4
5
6
7
1
3
12
11
10
9
8
7
4
2
1
2
4
2
3
22
2
1
2
0
17
1
4
15
16
18
1
9
6
5
3
1 Slider for selecting the operating mode (the RVP200 does not have the position )
2 LED (lit when operating mode is overridden; flashes when a fault is present)
3 Time switch
4 Setting knob for slope of heating curve
5 Setting knob for setback to the reduced temperature
6 Setting knob for the d.h.w. temperature (not available with the RVP200)
7 Setting knob for the normal temperature
The operating elements for the heating engineer can be accessed after removal of the
time switch or when the cover is opened.
The controller insert is secured to the base by means of two screws. The cover can be
sealed.
The RVP200/210 can be fitted in three different ways:
Wall mounting (on a wall, in a control panel, etc.)
Rail mounting (on a standard DIN mounting rail)
Flush panel mounting (control panel door, etc.)
Temperature acquisition
Time switches for the
heating program
Remote operation
Mechanical design
Controller
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RVP200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RVP200 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info