649334
1
Zoom out
Zoom in
Previous page
1/20
Next page
Siemens Building Technologies
CE1G3333xx 2015-03-06 1/20
G3333xx
de
Installationsanleitung
Tauchtemperaturregler
RLE162
en
Installation Instructions
Immersion temperature controller
fr
Instructions d'installation
Régulateur de température à plongeur
sv
Installationsanvisning
Dyktemperaturregulator
nl
Handleiding voor installatie
Dompeltemperatuurregelaar
it
Istruzioni di montaggio
Regolatore di temperatura ad immersione
pl
Instrukcja montażu
Zanurzeniowy regulator temperatury
es
Instrucciones de montaje
Controlador de temperatura de inmersión
da
Installationsvejledning
Dykrørstemperaturregulator
de Deutsch
Montage
Montageort
Maximal zulässige Umgebungstemperatur = 50 °C
Vorlauftemperaturregelung:
im Heizungsvorlauf; unmittelbar nach der Pumpe,
wenn diese im Vorlauf sitzt
im Heizungsvorlauf ca. 1,5...2 m nach der Mischstelle,
wenn die Pumpe im Rücklauf sitzt
Rücklauftemperaturregelung:
1...1,5 m nach der Mischstelle
Minimalbegrenzung der Kesselrücklauftemperatur und
Maximalbegrenzung der Vorlauftemperatur:
1...1,5 m nach der Mischstelle
Brauchwassertemperaturregelung:
1,5...2 m nach der Mischstelle
Wärmetauscherregelung:
möglichst nahe zum Wärmetauscher
Montieren
Der Einbau erfolgt ohne Schutzrohr mit einem
Gewindenippel.
Vorgehen:
1. Rohrleitung bzw. System entleeren
2. Montagelage wie folgt wählen:
Der Regler darf nicht Kopf stehen; der Kabeleintritt darf nicht oben sein.
Die Mindesteintauchtiefe muss 60 mm betragen
3
3
3
3
Z
0
4
Nach Möglichkeit in einen Rohrbogen einbauen. Der Tauchstab soll
gegen die Strömung zeigen.
3. Am Montageort Gewindestutzen in die Rohrleitung
einsetzen:
4. Gewindenippel montieren. Bei nicht dichtendem
Einbau-Gewindenippel Hilfsmittel zum Abdichten
verwenden (Hanf, Teflonband usw.)
5. Regler in den Gewindenippel schieben und
befestigen:
1
3333Z06
6. Rohrleitung bzw. System wieder auffüllen
Elektrische Installation
Örtliche Vorschriften für Elektroinstallationen beachten
Anschlussklemmen sind unter der flexiblen
Kunststoffabdeckung
Anschlussklemmen entsprechend den
Anlagendokumenten verdrahten. Wenn diese fehlen,
Anschlussschaltpläne in dieser Anleitung beachten
Zulässige Leitungslängen beachten
Gerät erst bei der Inbetriebnahme unter Spannung setzen
Externe vorgeschaltete Leitungsschutzschalter mit max.
C 10 A in allen Fällen erforderlich
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RLE162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RLE162 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info