465406
6
Zoom out
Zoom in
Previous page
1/50
Next page
6/50 2015-02-27 CE1G2205xx
Mounting notes REV24..
1 Placement of unit
· The REV24.. should be mounted in the main living room (for wall
mounting, refer to Figs. B through E)
· The REV24.. must be located such that it can acquire the room
temperature as accurately as possible, without getting affected by
direct solar radiation or other heat or refrigeration sources
min.
10 cm
2261Z03
2 Mounting
· Refer to Figs. A through E
3 Checking the wiring
For electrical connections, refer to “Connection diagram.
Note: Do not use stranded wires, only solid wires
or stranded wires with ferrules!
4 Notes
· The local regulations for electrical installations must be complied
with
· If the reference room is equipped with thermostatic radiator
valves, they must be set to their fully open position
· External preliminary protection with max. C 10 A circuit breaker is
required in all cases
Commissioning
1 Switching on the REV24..
· Remove the black battery transit tab (Fig. F); as soon as the tab is
removed, the unit is ready to operate
(also refer to operating instructions)
2 Selecting the language
· When starting up, the display shows the type of controller at top left
and “THANK YOU …“ in all available languages on the text line
· Press one of the buttons to stop the running display. The choice
of languages starts with “ENGLISH“ (factory setting). Press
or until the language you require appears. Press or
move the slider to confirm the selected language (also refer to
Fig. G)
Configuration and function check REV24..
1 Configuration
1.1 DIP switches
ON / OFF 1 2 3 4 5 6 7 8 9 10
See
See
1.1.1
Sensor calibration on Periodic pump run on
1.1.5
Sensor calibration off Periodic pump run off
1.1.2
Setpoint limitation
16…35 °C
Optimum start
control:
1 h/°C
1.1.6
Setpoint limitation
3…35 °C
Optimum start
control:
¼ h/°C
1.1.3
Temperature display °F
Optimum start
control:
½ h/°C
Temperature display °C
Optimum start
control: Off
1.1.4
PID self-learning
(Cooling on)
1.1.7
PID 6
(Heating on)
PID12 Quartz
1.1.8
2-Point
Radio clock
1.1.9
DIP switch reset
ON
1 342
2211Z32
567 89
When changing one or several DIP switch positions, a DIP switch reset must be made by pressing the DIP switch reset button
(also refer to Fig. 8). Otherwise, the previous settings will be maintained!
1.1.9
Factory setting: All DIP switches OFF
DE
EN
FR
IT
NL
ES
PT
CS
HU
PL
SV
FI
DA
TR
EL
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV24 in the language / languages: All languages as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV24

Siemens REV24 User Manual - English - 14 pages

Siemens REV24 User Manual - German - 2 pages

Siemens REV24 User Manual - Dutch - 2 pages

Siemens REV24 User Manual - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info