465406
7
Zoom out
Zoom in
Previous page
1/14
Next page
7 / 14
Siemens REV24.. room temperature controller CE1N2205en
Building Technologies 24.04.2008
Technical features
DIP switches
DIP switch
ON / OFF
1 2 3 4 5 6 7 8 9 10
Sensor calibration On
Periodic pump run and
anti-lime function On
A
Sensor calibration Off
Periodic pump run and
anti-lime function Off
E
Setpoint limitation 16…35 °C
Start optimization: 1 h/°C
B
Setpoint limitation 3…35 °C
Start optimization: ¼ h/°C
Temperature display °F
Start optimization: ½ h/°C
C
Temperature display °C
Start optimization: Off
F
PID self-learning
(Op. mode: Cooling)
PID 6
(Op. mode: Heating)
G
PID12
Quartz
D
2-point
Radio clock
H
J
DIP switch reset
ON
1 342
2211Z32
567 89
After you change one or several DIP switch positions, you must press the DIP switch reset button to reset the DIP
switch. Otherwise, the previous setting remains active!
J
Factory setting: All DIP switches to OFF
If the displayed room temperature does not match the measured room temperature, the
temperature sensor can be recalibrated.
Set DIP switch to ON and press the DIP switch reset button:
CAL symbol is displayed. The currently measured temperature flashes.
Press or to recalibrate by max. ± 5 °C.
Set DIP switch to OFF and press the DIP switch reset button to save the settings.
The minimum setpoint limitation of 16 °C prevents undesired heat transfer to neighboring
spaces in buildings featuring several heating zones.
DIP switch ON: Setpoint limitation 16…35 °C.
DIP switch OFF: Setpoint limitation 3…35 °C (factory setting).
Press the DIP switch reset button to save the settings.
DIP switch ON: Temperature display in °F.
DIP switch OFF: Temperature display in °C (factory setting).
Press the DIP switch reset button to save the settings.
A Sensor calibration:
DIP switch 1
B Setpoint limitation:
DIP switch 2
C Temperature display in
°C or °F:
DIP switch 3
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV24 in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV24

Siemens REV24 User Manual - German - 2 pages

Siemens REV24 User Manual - Dutch - 2 pages

Siemens REV24 User Manual - French - 2 pages

Siemens REV24 Installation Guide - All languages - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info