41495
4
Zoom out
Zoom in
Previous page
1/4
Next page
REV Thermostat Operating Tips
Always look at the bottom of the screen at the 24hr clock to see what time the
thermostat is programmed to come on and off. You can then instantly see if your heater
should be on either
temp or temp. If the heating is not on when the time clock
indicates that it should check to see that the time is set correctly. (see programming
sheet)
EXAMPLE
The above 24 hour time clock is running in
and is programmed for 2 time periods.
Heating is to come on at 0600 and off at 0800, it will then control to
temp. between
0800 and 1700, then heating will come back on at 1700 and off again at 2300.The
heating will then only come on during the night if the temperature in the house drops
below whatever
is set at.
What if you come home during the day at 1300 and would like the heating on?
Simply hit the
override button. will now appear on the screen and the heater
will now start. If you decide to leave again simply press the
over ride key and
it will return to
.
What if you are leaving your house for the weekend and would like to turn the
heating off?
Simply press
Program selector button 3 times until appears in the top right-hand
corner of the screen. The heating will now only come on if the house drops below 5 deg.
(this can also be used to turn heating off in summer)
What happens if a visitor complains of being too hot or too cold and would like a
temporary adjustment made to the heating set point temperature?
Simply press
button to temporally adjust the heating set point up or down.
Please Note: make sure that
is already displayed on the screen before making
adjustments.
What happens if the
Battery Symbol appears on the screen?
This means that you need to change the Batteries in your thermostat. You have
approximately 1 month to do this or you will lose your program. To change your batteries
simply slide the REV up out of its base. Open the battery compartment and remove the
old batteries. Place the new batteries in straight away, (you have 60 seconds to do this
other wise you will loose your programmed settings and your REV will return to factory
settings.)
4


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-rev16

Reset search

  • Hi ,
    How can we just do an on / off simple setting.. without the 3 times frames and fancy modes. We want to be able to push an on button when we up and an off button whn no longer required. Please help we are freezing!! ; )
    Submitted on 9-8-2020 at 01:55

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV16 in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV16

Siemens REV16 Installation Guide - English, German, Dutch - 18 pages

Siemens REV16 User Manual - Dutch - 2 pages

Siemens REV16 Installation Guide - Danish - 18 pages

Siemens REV16 User Manual - French - 2 pages

Siemens REV16 Installation Guide - French - 18 pages

Siemens REV16 User Manual - French - 12 pages

Siemens REV16 Installation Guide - Italian, Polish, Swedish, Spanish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info