465402

Siemens REV13 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
REV13 User Guide Room temperature controller REV13 Page 1 of 2
REV13 User Guide SIEMENS BUILDING TECHNOLOGIES
Slider Positions
RUN
1 2 3 4 5 6 7 8 9 10 11
Time setting
Date
Day / month / year
Start time 1 in
Automatic mode
with 2 heating
phases
End 1 in Automatic
mode with 2 heating
phases
Start time 2 in
Automatic mode
with 2 heating
phases
End 2 in Automatic
mode
with 2 heating
phases
Start time in
Automatic mode
with 1 heating phase
End in Automatic
mode
with 1 heating phase
Comforttemperature
Automatic mode A
and B
Saving temperature
Automatic mode A
and B
Temperature remote
control
Slider positions
If the selected operating mode does not support the setting, the time display shows PASS
STEP Symbol
Programming
1
Initial Start Up - Enabling Battery Power:
Remove the controller from the mounting base and pull out the black insulating tape tab from the battery compartment: The controller
turns on automatically. Re-insert the controller in the mounting base.
2
Language Selection:
After startup, a welcome message appears for approx 2 minutes. Press a button to interrupt the message. Language selection starts
with “ENGLISH“ (factory setting). Press
or until your desired language appears. Press or move the slider to accept
your language choice.
Hint: if you choose the incorrect language, an Expert Level Reset will need to be performed. This is achieved by:
Pressing simultaneously the DIP switch reset button (on the back of the unit under the dip switch cover) and the
and
for 5 seconds: After this reset, all factory settings will be reloaded. This applies to both the slider settings and the
settings made on the expert level
.
3
Setting Time:
Move the Slider to position 1 (time setting): Press
or to set the time.
4
Setting Date:
Slider in position 2 (date: day/month/year): Press
or to set the date. (Note: the day of the week is automatically chosen)
5
Automatic Mode with Two Heating Phases (START) Phase 1: (Factory set at 06:00)
Slider in position 3 (start time for comfort phase 1): Press
or to set the start time for heating phase 1.
Hint: you will notice the flashing time cursor on the 24 hour time bar (at the bottom of the screen) corresponding with the
entered time, moves as you adjust the time with the
or buttons
6
Automatic Mode with Two Heating Phases (END) Phase 1: (Factory set at 08:00)
Slider in position 4 (end time for comfort phase 1): Press
or to set the end time for heating phase 1.
7
Automatic Mode with Two Heating Phases (START) Phase 2:
(Factory set at 17:00)
Slider in position 5 (start time for comfort phase 2): Press
or to set the start time for heating phase 2.
8
Automatic Mode with Two Heating Phases (END) Phase 2: (Factory set at 22:00)
Slider in position 6 (end time for comfort phase 2): Press
or to set the end time for heating phase 2.
9
Automatic Mode with Single Heating Phase (START): (Factory set at 07:00)
Slider in position 7 (start time for comfort phase): Press
or to set the start time for heating phase B.
10
Automatic Mode with Single Heating Phase (END):
(Factory set at 23:00)
Slider positions 8 (end time for comfort phase): Press
or to set the end time for heating phase B.
11
Setting Energy Saving Temperature from Monday to Sunday: (Factory set at 20°C)
Slider in position 9 (comfort temperature for Automatic mode A and B): Press
or to set the required comfort temperature.
12
Setting Energy Saving Temperature from Monday to Sunday: (Factory set at 16°C)
Slider in position 10 (energy saving temperature for Automatic mode A and B): Press
or to set the required energy saving
temperature.
Note: The energy saving temperature in time programs A and B is independent of the energy saving temperature in operating mode “Continuously
Energy Saving mode“.
Hint: If you do not want your heating to come on at night (or anytime it is controlling to the
setpoint) then set this value low e.g. 3.0°C
13
RUN
Completed Programming Move the slider to RUN position and close the cover.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV13 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REV13

Siemens REV13 User Manual - German - 2 pages

Siemens REV13 User Manual - Dutch - 2 pages

Siemens REV13 User Manual - French - 2 pages

Siemens REV13 Installation Guide - All languages - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info