456800
7
Zoom out
Zoom in
Previous page
1/15
Next page
7/15
Siemens Building Technologies Ruimtetemperatuurregelaar REV23RF CE1N2265nl
HVAC Products 15.01.2003
Begrenzing gewenste waarde
PID-regeling, zelflerend
Inschakeloptimalisering
Periodieke werking pomp uit
Verwarmen actief
Installateurniveau
Door het ingedrukt houden van de warmer- en kouder-toets en het gelijktijdig draaien
van de rolschakelaar, eerst weg van de display en dan in de richting ervan, wordt het
niveau voor de installateur vrijgegeven.
Als de weergegeven temperatuur niet overeenstemt met de werkelijke ruimtetempera-
tuur, kan de temperatuuropnemer worden gecalibreerd.
(Voor een calibratie is toegang tot het installateurs niveau nodig.)
De weergegeven temperatuur kan in stappen van 0,2 °C (max. ± 2 °C) naar de werke-
lijke ruimtetemperatuur worden gecorrigeerd.
De minimum begrenzing van de gewenste waarde op 16 °C voorkomt "diefstal" van
warmte in gebouwen met meerdere verwarmingszones.
Het inschakeltijdstip van de 1
e
verwarmingsperiode wordt zodanig naar voren gescho-
ven, dat de ingestelde gewenste waarde op het gewenste tijdstip wordt bereikt.
De instelling is afhankelijk van het regeltraject, d.w.z. van de warmteoverdracht (lei-
dingnet, radiatoren), gedrag van het gebouw (massa, isolatie) en de verwarmingscapa-
citeit (ketelcapaciteit, aanvoertemperatuur).
De inschakeloptimalisering is uitgeschakeld bij
t
T
17
18
19
- 4
- 2
2264D02
16
- 3
1/4h/°C
1/2h/°C
1h/°C
Start
- 2
- 1
- ½- 1½
- 1
- ½
- ¼- ¾
P
on
20
°C
T1
- 1 h
(langzaam regeltraject)
h
(gemiddeld regeltraject)
h
(snel regeltraject)
TR
x
h
h
h
h
h
h
h
h
h
periode
inschakeloptimalisering UIT (niet actief)
T Temperatuur (°C) TR
x
Gemeten ruimtetemperatuurwaarde
t Vervroegd inschakelpunt (h) P
on
Vroegste startpunt inschakeloptimalisering
De REV23RF is een tweepuntsregelaar met PID-gedrag. De ruimtetemperatuur wordt
door cyclisch in- c.q. uitschakelen van een apparaat geregeld.
De regeling vormt de besturingssignalen overeenkomstig de afwijking tussen de ge-
wenste waarde en de door de ingebouwde temperatuuropnemer gemeten waarde.
Afhankelijk van het gekozen algoritme reageert de installatie verschillend snel op de
afwijking:
Fabrieksinstellingen
installateurniveau
Toegang
Opnemercalibrering
CAL
Begr. gew. waarde
Inschakeloptimalise-
ring
Voorbeeld bij een geme-
ten ruimtetemperatuur
van 18 °C en een ge-
wenste waarde van 20 °C
Regeling
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REV-R.02-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REV-R.02-1 in the language / languages: Dutch as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info