620396
1
Zoom out
Zoom in
Previous page
1/2
Next page
Commissioning and quick start
1. Receiver
REA-R.03/1
Switch on power and press
“RESET” button for about
4 seconds: Orange LED_2
flashes briefly. Then, press “SET
button for about
4 seconds: Orange LED_2
flashes slowly; learning mode is
active.
Within 25 minutes press “ESC”
button on REA23.03RF for about
4 seconds: Orange LED_2
flashes fast and briefly; LED_1
changes from red to flashing
green.
After commissioning, the unit will
operate automatically.
2. Transmitter (REA23.03RF)
1.
2.
1. Remove controller from its base and open cover
of the battery compartment.
2. Remove the black battery transit tab. The
controller will switch itself on.
3. Close the battery compartment and replace the
controller.
Selecting the operating mode
The operating mode selector enables you
to select 5 different operating modes:
Automatic operation with a maximum
of 3 heating / cooling periods
Continuously comfort mode
Continuously economy mode
Continuously frost protection /
overheat protection mode
Special day with one comfort period
Changing temporarily the current
setpoint temperature
° C
The change is
maintained until
the next switching
point is reached!
1. When pressing the
or button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2. After a short time, the initial display will
automatically appear again.
Changing temporarily the
temperature setpoint (savings tip)
In operating modes
and , this
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa.
The change will automatically be
cancelled when reaching the next
switching point or when selecting another
operating mode.
(Press button for approximately
4 seconds to transmit test telegrams.)
Symbols
Special day
2 Comfort
periods
“Time” menu Heating active
Setpoint
comfort
3 Comfort
periods
T
“Temperature
” menu
Cooling active
Setpoint
economy
Current weekday
“Comfort
period“ menu
Automatic
operation
Setpoint
protective
temp.
Working-day group
“Absence”
menu
Continuously
comfort mode
Setpoint
absence
Weekend group
Battery
change
Continuously
economy mode
Not used with
this unit
Entire week
Absence
Frost- or / over-
heating protection
1 Comfort
period
Time schedule
Functions of
the ESC-button,
the setting knob
and the OK-button
ESC-button
ESC
- Press the ESC-button to return
to the menu level previously
activated or to leave the menu
level in a number of steps until
you reach the initial display
(the settings currently displayed
will be accepted).
- Press this button for approx.
4 seconds to transmit learning
telegram.
+
ESC OK
OK - button:
OK
You access the menu level
You activate the menu
You save the inputs
You switch to the next
menu item
You accept the menu item
Setting knob:
Setting knob is operative in menu levels only !
You go from one menu to the next
You change the setting variables (temperature in increments
of 0.2 °C, time in increments of hours and minutes)
You select predefined functions
Setting the time of day and the weekday
Adjustable in operating modes , , and
OK
OK
h
OK
h
OK
ESC
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. OK-button: You access the menu level;
the clock flashes.
2. OK-button: You accept the menu;
the hours flash.
3. Setting knob: Set the current hour.
4. OK-button: You save the input;
the minutes flash.
5. Setting knob: Set the current minute.
6. OK-button: You save the input;
the weekday flashes.
7. Setting knob: Select the current weekday.
8. Press the ESC-button to return to the menu level:
the T menu flashes
(Change not necessarily required; press the
ESC-button again to return to the initial display).
Changing temperatures long-term
Adjustable in operating modes , , and
OK
OK
OK
° C
OK
OK
° C
OK
OK
° C
OK
ESC
ESC
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. OK-button: You access the menu level;
the clock flashes.
2. Setting knob: Clockwise to the T menu.
3. OK-button: You accept the menu;
symbol
flashes.
4. OK-button: You accept
;
the setpoint flashes.
5. Setting knob: Set the comfort temperature
6. OK-button: You save the input;
symbol
flashes.
7. OK-button: You accept
;
the setpoint flashes.
8. Setting knob: Set the economy temperature.
9. OK-button: You save the input;
symbol
flashes.
10. OK-button: You accept
;
the setpoint flashes.
11. Setting knob: Set the frost protection /
overheat protection temperature.
12. OK-button: You save the input;
symbol
flashes.
Adjustment not required;
not used with this unit.
13. Press the ESC-button to return to the menu level:
The comfort periods
menu
flashes
(Change not necessarily required; press the
ESC-button again to return to the initial display)
Siemens / Building Technologies / HVAC Products B2218en 26.03.2007
en
Operating Instruction
REA23.03RF
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens REA23.03RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens REA23.03RF in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens REA23.03RF

Siemens REA23.03RF User Manual - German - 2 pages

Siemens REA23.03RF User Manual - French - 2 pages

Siemens REA23.03RF Installation Guide - All languages - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info