620388
1
Zoom out
Zoom in
Previous page
1/2
Next page
CE1B3071en / 05.07.2007 Subject to alteration Siemens Building Technologies / HVAC Products
Operating instructions
RDJ10
The RDJ10 is a room thermostat with a 24-hour time program that allows you to set the desired room temperature (setpoint) at
the time you want. The unit features an ergonomic setting knob for ease of temperature control.
Display
Actual room temperature in ºC
Indicates when there is demand for
heat
The unit is controlling to the selected
comfort temperature
Replace batteries
The unit is controlling to the selected
energy saving temperature
Frost protection: The unit is
controlling continuously to the frost
protection temperature
The unit is controlling to the selected
frost protection temperature
Energy saving mode: The unit is
controlling continuously to the
energy saving temperature
Comfort mode: The unit is
controlling continuously to the
comfort temperature
Indicates when the temperature
setpoint has been changed by the
user. This setpoint will be maintained
until the next switching time. This
function is only active when the unit is
in automatic mode.
Automatic mode: The unit is
controlling to the time and
temperature programs that have
been selected
Setting knob
Warmer/colder for selecting
the temperature setpoint
Programming selector
Battery compartment
2 alkaline batteries type AA, 1.5 V
Time setting position
Operating mode selector
A1
First switch on time
Automatic mode: The unit is controlling to the time and
temperature programs that have been selected
A2
First switch off time
Comfort mode: The unit is controlling continuously to the
comfort temperature
A3
Second switch on time
Energy saving mode: The unit is controlling continuously
to the energy saving temperature
A4
Second switch off time
Frost protection: The unit is controlling continuously to the
frost protection temperature. This setpoint is fixed at 5 ºC
Comfort temperature setting
Advance button
Energy saving temperature setting
Switches the operating mode from comfort to energy saving,
or vice versa, until the next switching time
RUN
Set the controller to RUN when all
programming is completed
Introduction
This leaflet gives you easy-to-follow instructions on how to set
up your RDJ10 room thermostat.
Contents
Commissioning
Initial power-up
Setting the time
Setting the switch on and off times
Setting the comfort temperature
Setting the energy saving temperature
Changing temporarily the current setpoint
What does the Advance button do?
Changing batteries
Energy savings tips
Commissioning
Remove the black transit tabs from
the alkaline batteries. Check to see if
the battery holder is in its correct
position
If no batteries are inserted, fit
2 alkaline batteries type AA in
the battery compartment
Initial power-up
Once batteries are fitted, all symbols will
appear on the display as shown for about
2 seconds.
Setting the time
1. Set the programming selector to
position
.The current time setting
flashes.
2. Turn the setting knob to the left to
decrease the time, or to the right to
increase the time.
3. When the correct time is displayed,
move the programming selector to
any other position to confirm your
setting.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDJ10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDJ10 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDJ10

Siemens RDJ10 User Manual - German - 2 pages

Siemens RDJ10 User Manual - French - 2 pages

Siemens RDJ10 Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info