CE1B3073de / 05.06.2009 Subject to change Siemens Building Technologies
Bedienungsanleitung
RDH10M
Der RDH10M ist ein Raumthermostat mit OpenTherm-Busschnittstelle, mit dem Sie die gewünschte Raumtemperatur
(Sollwert) zum gewünschten Zeitpunkt einstellen können. Das Gerät verfügt über einen ergonomischen Drehknopf
zur komfortablen Temperaturregelung.
Display
Aktuelle Raumtemperatur in ºC
Das Gerät regelt auf die gewählte
Komforttemperatur
Anzeige von Wärmebedarf / BMU
signalisiert „Brenner ein“
Batterien ersetzen
Drehknopf
Zum Wählen des Raum-
temperatur-Sollwerts
Bateriefach
2 Alkalibatterien Typ AA, 1,5 V
Inbetriebnahme (optional bei Speisung über OpenTherm-Bus)
•Um zu vermeiden, dass sich der Raumthermostat ausschaltet, wenn die Boiler
Management Unit (BMU) ausgeschaltet wird
•Entfernen Sie die schwarzen Isolierstreifen von den beiden mitgelieferten Batterien.
Überprüfen Sie, ob die Batteriehalterung in ihrer richtigen Position ist
•Sind keine Batterien vorhanden, so setzen Sie 2 Alkalibatterien Typ AA ins
Batteriefach ein
Erstes Aufstarten
Sind die Batterien eingesetzt, erscheinen alle
Symbole für etwa 2 Sekunden auf der Anzeige.
Einstellen der gewünschten
Raumtemperatur
•Drehen Sie den Einstellknopf im Gegen-
uhrzeigersinn, um die Temperatur zu
reduzieren, im Uhrzeigersinn, um sie zu
erhöhen, dies in Schritten von 0.5 °C
•Die gewünschte Temperatur erscheint auf
der Anzeige neben dem Symbol der
Komforttemperatur
Fehler der Boiler Management Unit
(BMU
Falls auf der Anzeige ständig Err erscheint, bitte
Ihren Heizungsfachmann informieren.
Ersetzen der Batterien
1. Legen Sie 2 neue Alkalibatterien vom Typ AA, 1,5 V bereit.
2. Innerhalb 1 Minute: Nehmen Sie die Batteriehalterung heraus,
entfernen Sie die Batterien, setzen Sie die neuen ein und schieben
Sie die Batteriehalterung wieder in ihre Position.
3. Entsorgen Sie die alten Batterien gemäss Umweltvorschriften.
Energiespartipps ohne Komforteinbussen
•Keine Raumtemperaturen über 21 ˚C
•Lüften Sie die Räume nur für kurze Zeit, aber kräftig, mit weit
offenen Fenstern
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Siemens RDH10M at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Siemens RDH10M in the language / languages: German as an attachment in your email.
The manual is 0,08 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.