CE1B3069en / 05.07.2007 Subject to alteration Siemens Building Technologies / HVAC Products
Operating instructions
RDH10
The RDH10 is a room thermostat that allows you to set the desired room temperature (setpoint) at the time you want.
The unit features an ergonomic setting knob for ease of temperature control.
Display
Actual room temperature in ºC
The unit is controlling to the selected
comfort temperature
Indicates when there is demand for
heat
Replace batteries
Setting knob
Warmer/colder knob for
selecting the temperature
setpoint
Battery compartment
2 alkaline batteries type AA, 1.5 V
Commissioning
•Remove the black transit tabs from the 2 alkaline batteries. Check to see if the
battery holder is in its correct position
•If no batteries are inserted, fit 2 alkaline batteries type AA in the battery
compartment
Initial power-up
Once batteries are fitted, all symbols will appear
on the display as shown for about 2 seconds.
Changing the batteries
1. Get 2 new alkaline batteries type AA, 1.5 V.
2. Within 1 minute: Remove the battery holder, then the batteries,
insert the new batteries and replace the battery holder.
3. Make certain the old batteries are disposed of properly,
in compliance with environmental requirements.
Selecting the required temperature
•Turn the setting knob counter-clockwise to
decrease the setpoint, or clockwise to
increase the setpoint in increments of 0.5 °C
•The required temperature is displayed next
to the comfort temperature symbol
Energy saving tips without sacrificing comfort
•Never allow room temperatures to exceed 21 ˚C
•Air out rooms for short periods of time only, but properly,
with the windows wide open
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Siemens RDH10 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Siemens RDH10 in the language / languages: English as an attachment in your email.
The manual is 0,3 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
