620503

Siemens RDE100.1DHW Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
2/4 Operating Instructions CB1B1423en_01 / 2013-03-08 Siemens Building Technologies
Are your rooms too warm/too cold?
+
–
ok
set
mode
Press + or – to increase or decrease the room
temperature setpoint in increments of 0.5 °C / 1 °F .
Proceed as follows:
• Press
+
or
–
to adjust the setpoint temporarily.
This adjustment is reset as soon as the
operating mode changes.
• Press ok, set or mode to save the value or wait
for the program to exit automatically
• To lock the setpoints, use parameters P06 and
P08.
Do you want to change the operating mode?
mode
!
The thermostat provides Comfort mode, Economy
mode, and Auto mode. Changeover between the
operating modes can be made manually by pressing
mode.
Comfort mode is the permanent (24 h) selection
of Comfort. Select this mode to maintain Comfort
temperature permanently without any time switch. It is
used during occupancy periods, for example.
Economy mode is the permanent (24 h) selection
of Economy. Select this mode to maintain the
Economy temperature permanently without any time
switch.
It is used during non-occupancy periods, for example
at night.
AUTO
In Auto timer mode, operating modes (Comfort,
Economy) are changed automatically according to the
time switch set.
Note:
Frost protection is a function always active in the
background. As soon the room temperature falls
below 5 ºC, the unit automatically activates the
heating .
Do you want to set permanent temperature
setpoints?
set
ok
+
–
mode
!
• Press set and select
• Press ok to confirm
• Press mode to select an operating mode, Comfort
or Economy
• Press
+
or
–
to adjust the setpoint permanently.
• Press ok to confirm
• Press mode to exit or wait for the program to exit
automatically
Note: This permanent setpoint is used during Auto timer
mode.
Energy saving tips without loss of comfort
• Select Auto timer mode during the heating period, and set the
time switch according to your normal habits at home
• Select Economy mode or Holiday mode for long periods of
non-occupancy and during summer period
Do you want to set your Holiday mode?
set
ok
+
–
mode
!
Use the Holiday mode to set the thermostat to a
constant temperature while absent.
• Press set and select
• Press ok to confirm
• Press
+
or
–
to adjust the temperature setpoint
• Press ok to confirm
• Press
+
or
–
to adjust the number of days for
holidays (Note: 0 = Holiday mode OFF)
• Press ok to save the value
• When Holiday mode is activated, the remaining
days are displayed on the screen
Note: If you press mode while Holiday mode is active,
the function is turned off and the
symbol
disappears.
If the Comfort and Economy setpoint values are both
locked, the lowest locked setpoint value is the Holiday
mode setpoint value. You can adjust the setpoint
temperature from 5 ºC up to the lowest locked setpoint
value.
Do you want to enter your own time switch?
Option 1: Time switch with individual day selection (P11=0)
set
ok
+
–
mode
You can select Comfort or Economy at 15 minute
intervals throughout the day. The 0:00 to 24:00 hour
time bar allows you to set the operating mode for the
selected day(s).
Example:
0
6
12
24
18
1 2
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy temperature
When Auto timer mode is enabled, changeover between
the operating modes is automatic after the settings are
saved.
Proceed as follows:
1) Press set and select
AUTO
.
2) Press ok to confirm.
3) Time switch for day Mon(1) is displayed.
4) Press
+
or
–
to select the day, from Mon(1) to
Sun(7).
5) Press ok to confirm the selection and initiate time
programming.
During programming step:
6) Press mode to select an operating mode, (Comfort or
Economy) or
7) Press
+
or
–
to adjust the time setpoint by 15
minutes for the selected mode.
8) Press ok to save the time switch.
9) Repeat steps 4-8 for all remaining days (if required);
or
10) Press mode or wait for the program to exit
automatically.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RDE100.1DHW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RDE100.1DHW in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens RDE100.1DHW

Siemens RDE100.1DHW User Manual - German - 4 pages

Siemens RDE100.1DHW User Manual - Dutch - 4 pages

Siemens RDE100.1DHW User Manual - French - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info