620556
4
Zoom out
Zoom in
Previous page
1/4
Next page
4/4 2015-07-30 G1202 8 000 052 717 Siemens Building Technologies
de
Spannungsbereich: AC 24...250 V (0.1…16A)
Elektrische Anschlüsse und Schutzleiter:
Push-in* Klemmen für Leiter 0.75...2,5 mm
2
STB manuell entriegeln erst möglich nach dem Abkühlen um
~7 K unter die Ausschalttemperatur
Verschmutzungsgrad: (2)
Bemessung-Stossspannung 2.5kV
Kein elektronisches Gerät
Kapillarlänge zwischen 700mm - 1600 mm
1)
Standards, Normen: CE, PED, DIN
1)
Produktenorm EN 60 730-1
EN 60 730-2-9
EN 14597
1) gemäss Geräteblättern
en
Voltage range: AC 24...250 V (0.1…16A)
Electrical connections and protective conductor:
Push-in* terminals for conductor 0.75...2,5 mm
2
..
STB can be reset only after the temperature has dropped
~7 K below the switch-off temperature
Degree of pollution: (2)
Rated impulse voltage 2.5kV
Device without electronic
Capillary length: 700 mm - 1600 mm
1)
Standards : CE, PED, DIN
1)
Product standards EN 60 730-1
EN 60 730-2-9
EN 14597
1) according to data sheets
fr
Plage de tension: AC 24...250 V (0.1…16A)
Raccordements électriques et fil de protection:
bornes Push-in* pour fil de 0.75...2,5 mm
2
Déverrouillage STB manuel seulement possible après refroidissement
~7 K en-dessous de la température de coupure
Degré d'encrassement : (2)
Tension assignée de tenue aux chocs: 2.5kV
Appareil sans électronique
Longueur du capillaire : 700 mm - 1600 mm
1)
Normes et standards : CE, PED, DIN
1)
Normes pour produits EN 60 730-1
EN 60 730-2-9
EN 14597
1) voir fiches techniques
nl
Spanningsbereik: AC 24...250 V (0.1…16A)
Elektrische aansluiting en aarding:
Push-in* klemmen voor aansluiting 0.75...2,5 mm
2
STB handmatig ontgrendelen pas mogelijk na afkoelen tot
~7 K onder de uitschakeltemperatuur
Vervuilingsgraad: (2)
Nominale piekspanning 2.5kV
Regelaar bevat geen electronica
Capillarlengte : 700 mm - 1600 mm
1)
Standaards en normen: CE,PED, DIN
1)
Productnorm EN 60 730-1
EN 60 730-2-9
EN 14597
1) overeenkomstig apparatenblad
it
Tensione d’alimentatione: AC 24...250 V (0.1…16A)
Collegamento elettrico e di protezione:
Morsetti Push-in* per collegamento 0.75...2,5 mm
2
STB ripristino manuale possibile solo dopo raffredamento del sensore ~7 K
Grado d‘inquinamento: (2)
Tensione impulsiva nominale 2.5kV
Dispositivo non elettronico
Lunghezza capillare da 700 mm - 1600 mm
1)
Norme e omologazioni:CE, PED, DIN
1)
Norma prodotto EN 60 730-1
EN 60 730-2-9
EN 14597
1) vedi fogli tecnici
es
Rango de alimentación: AC 24...250 V (0.1…16A)
Conexiones eléctricas y conductor protector:
Bornas Push-in* para conexiones 0.75...2,5 mm
2
..
STB pueden reajustarse sólo después de una cda de temperatura
de ~7 K por debajo de la temperatura de desconexión
Grado de polución: (2)
Tensión media por impulso 2.5kV
Sin dispositivo electrónico
Longitud del capilar 700 mm - 1600 mm
1)
Estándares CE, PED, DIN
1)
Estándares del producto EN 60 730-1
EN 60 730-2-9
EN 14597
1) de acuerdo con las hojas técnicas
de
Zubehördatenblatt N1193, N1194
en
Data sheet with accessories N1193, N1194
fr
Fiche produit des accessoires N1193, N1194
nl
Apperatenblad met toebehoren N1193, N1194
it
Foglio tecnico accessori N1193, N1194
es
Hoja técnica con accesorios N1193, N1194
2007 Siemens Switzerland Ltd.
*Push In is a patented connection technology designed by Weidmüller, Germany’s leading manufacturer of electrical connection technologies.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens RAK-TB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens RAK-TB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info