671506
2
Zoom out
Zoom in
Previous page
1/36
Next page
CMK2000
2 A5E36847555A/001, 11/2015
WARNUNG
Anschluss nur über Sicherheitskleinspannung /
Schutzkleinspannung
Lebensgefahr oder schwere Verletzungsgefahr
Das Gerät ist für den Betrieb mit einer direkt
anschließbaren Sicherheitskleinspannung (Safety Extra-
Low Voltage, SELV) mit sicherer elektrischer Trennung
nach IEC 60950-1 / EN 60950-1 / VDE 0805-1 ausgelegt.
Für den Einsatz in Nordamerika gilt: Das Netzteil für die
Versorgung des Geräts muss NEC Class 2 gemäß
National Electrical Code (ANSI / NFPA 70) entsprechen
Verbinden Sie nur Sicherheitskleinspannungen (SELV) mit
sicherer elektrischer Trennung (Class 2 Power Supply in
Nordamerika) mit den Versorgungsanschlüssen und den
Prozess- und Kommunikationssignalen, einschließlich
Ethernet.
Rechtliche Hinweise
ACHTUNG
Das Gerät unterliegt Lizenzbestimmungen und bestimmten
Einsatzbedingungen. Beachten Sie hierzu die
Informationen unter http://www.siemens.com/gamma-td
(Suchtext "LOGO").
Status des CMK2000
P1-
LED
KNX-
LED
Bedeutung
x x Fehler: Versionskonflikt der
Firmwarekomponenten
x
Gerät defekt
x x
Kommunikationsfehler oder
LOGO! im Betriebszustand
"Stop"
x x
Wartungszustand: Firmware-
Update läuft
x x
Unvollständige Konfiguration
oder Programmiermodus aktiv
x x Fehlerfreier Betriebsmodus
Verbindungsstatus zur LOGO!
RUN-
LED
P1-
LED
KNX-
LED
Bedeutung
x
x LAN-Link besteht und LAN-
Kommunikation aktiv
x
x LAN-Link besteht
x
x kein LAN-Link besteht
Verbindungsstatus KNX / Programmiermodus / Reset
RUN-
LED
P1-
LED
KNX
-LED
Bedeutung
x x
kein KNX-Bus angeschlossen
x x
KNX-Bus angeschlossen
x x
Programmiermodus aktiv
x x
Unvollständige Konfiguration
Bedeutung der LED-Symbole
Symbol
Bedeutung
LED ist aus
LED leuchtet (rot, orange oder grün)
LED blinkt einfarbig (rot, orange oder grün)
LED blinkt zweifarbig (orange/grün)
x
LED-Zustand ist nicht relevant
Wahl des Einsatzortes / Einbaulage
Das Gerät ist auf einer Hutschiene oder an einer Wand zu
befestigen.
Zulässige Einbaulagen: horizontal oder vertikal
Stellen Sie sicher, dass der zulässige
Umgebungstemperaturbereich eingehalten wird:
Horizontale Installation: 0 °C bis 55 °C
Vertikale Installation: 0 °C bis 45 °C
Stellen Sie sicher, dass es bei einer relativen
Luftfeuchtigkeit zwischen 10% und 95% zu keiner
Kondensation kommt.
Stellen Sie sicher, dass der Luftdruck zwischen 795 hPa
und 1080 hPa beträgt.
Halten Sie oben und unten ausreichend Abstand ein
(mindestens 35 mm). Sehen Sie genügend Platz für
Versorgungsspannungs-, Ethernet- und KNX-
Busanschluss vor.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Logo CMK2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Logo CMK2000 in the language / languages: English, German, French, Italian, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info