504665

Siemens Gigaset DA710 Manual

5
Zoom out
Zoom in
Previous page
1/18
Next page
Gi
gaset
DA
710
/
en
/
A
30350-
M
213-
R
101-2-7
W
19
/
us
i
ng.
f
m
/
19.07.2012
de en fr nl 5
1110-01
Control key
The telephone's functions are activated and the menu is navigated
using the control key. The functions offered depend on the operating
situation.
Writing and editing text
~ Enter text using the keypad.
Multiple letters and numbers are assigned to each key between
and O and Q, * and #. The entry of a specific charac-
ter is carried out by pressing the corresponding key multiple times.
You will find a table of applicable characters in the Appendix
£ page 16.
To switch between capital letters (ABC), lower case (abc) and numbers
(123), press the shift key
L until the desired figure is briefly displayed
on the bottom right. This mode is not available in lines for telephone
number entry.
Moving the cursor
t s Press the control key up/downwards in order to move the
cursor to the left/right in the text.
Deleting/correcting characters
X Press the left-hand side u of the control key. The cha-
racter to the left of the cursor is deleted. Press and hold
down to delete the whole line.
Menu
The functions of your telephone are offered to you via a menu that con-
sists of several levels.
¤ Press the M key to open the menu.
The menu functions and submenu functions where necessary are dis-
played in list form.
¤ Scroll with the control key q to the required function and press
the right-hand side of the control key
v, ([) to confirm your
selection.
¤ Press u (X) in order to return to the previous menu level.
¤ Press the M key to return to the start menu.
Description of the menu selection steps
The steps to select a menu function are set out in these operating
instructions as follows:
M ¢ Phone setup ¢ Language
This is accessed as follows:
¤ Open the menu using the M key.
¤ Using the control key q, select the entry Phone setup and press
the right-hand side of the control key
v, ([).
¤ Using the control key q, select the entry Language and press the
right-hand side of the control key
v, ([).
Phonebook, call list and redial list
Phonebook, call list and redial list can be opened using the menu or
keys.
Using the menu
¤ Press the M key to open the menu.
¤ Select Call list (CLIP) or Phonebook or Redial in order to open the
desired list.
Using keys
Y Open the call list using the control key t.
Z Open the phonebook using the control key s.
I Open the redial list.
The first list entry will be displayed in each case.
¤ Scroll with the control key q to the desired entry and press the
right-hand side of the control key
v, ([) to open the context
menu.
In standby:
t
Y
Open the call list
s
Z
Open phonebook
t
s
In menus and lists:
Scrolls one entry upwards/downwards.
Hold down: Scrolls the list fast upwards/downwards.
While editing names and numbers:
Moves the cursor to the left/right.
Hold down: Moves the cursor fast to the left/right.
While pressing the direct dial key:
Displays long phone numbers completely.
u
In menus, lists and with direct dial keys:
Exits the menu, list or direct dial key.
While changing settings:
Terminates the action without changing the setting.
While editing names and numbers:
Deletes the character to the left of the cursor.
Hold down: Deletes the line.
If the entry is empty: Exits the editing mode.
v
Phone number entered or direct dial key pressed:
Dials the phone number.
In menus and lists:
Opens the submenu/context menu.
While editing entries/changing settings:
Saves the edits or activates the selected settings.
Note
To exit the menu without saving any previous entries simply lift and
then hang up the handset. After a short time the display will then
once again show the standby mode.
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-da710

Reset search

  • How do you push the end of the coiled cable into the relevant opening of the set? Submitted on 25-9-2021 at 15:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset DA710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset DA710 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset DA710

Siemens Gigaset DA710 User Manual - German - 20 pages

Siemens Gigaset DA710 User Manual - Dutch - 20 pages

Siemens Gigaset DA710 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info