528227

Siemens Gigaset AL28H Manual

5
Zoom out
Zoom in
Previous page
1/10
Next page
AS28H Handset / Israel EN / A31008-M2051-B501-1-VU19 / starting.fm / 19.02.2009
5
Registering the handset to the base station
Before you can use the phone, you must first register the handset to the base station.
The actual registration procedure will depend on the type of base station.
Automatically register the AS28H handset to the Gigaset AS280DUO/AS285 base station
Manually register the AS28H handset
You must activate manual registration of the handset on both the handset and the
base station.
1. On the handset:
MENU ¢ Settings ¢ OK ¢ Handset ¢ OK ¢ Register HS
¢ Enter the base station system PIN (default setting: 0000) ¢ OK.
2. On the base station: Wi
thin 60 seconds of entering the system PIN, press and hold the
registration/paging key (min. 3 seconds). See also the user guide for the base station.
After successful automatic or manual registration, the idle screen is displayed:
The handset is assigned the lowest unassigned internal number (1–4). If more than one
handset is registered to the base station, the internal handset number appears in the top
left of the display, e.g. 2. If the internal numbers 1–4 are already assigned to other
devices, number 4 will be overwritten.
Please note
Only place the handset in the base station or c
harging cradle that is intended for it.
V
Registering
V
Put into base
MENU
V
Registering
V
INT MENU
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

siemens-gigaset-al28h

Reset search

  • Al28h. The phone only rings five times before going to ansaphone.

    1 how do I increase the number of rings to give me time before the call is taken by ...?

    2 why is no proper message given on the ansaphone …..only details of who called me. Why no proper message ? Submitted on 17-9-2023 at 13:54

    Reply Report abuse

  • since we had a powercut on saturday we no longer have a dialing tone Submitted on 23-10-2022 at 17:15

    Reply Report abuse

  • How do I de activate the alarm clock as it is set and I want it deactivated Submitted on 23-6-2020 at 23:27

    Reply Report abuse

  • User ID not displaying, network provider has checked, deactivated and reactivated, issue has been raised with line provider, any advice/resolutions welcome. Thanks. Sue Submitted on 27-1-2020 at 11:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset AL28H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset AL28H in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset AL28H

Siemens Gigaset AL28H User Manual - German - 16 pages

Siemens Gigaset AL28H User Manual - Dutch - 16 pages

Siemens Gigaset AL28H User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info