515481
3
Zoom out
Zoom in
Previous page
1/8
Next page
3
AL13H (AL14H) / SEA / A31008-M2050-Y701-1-7619 / AL14H_EN_SEA.fm / 10.09.2008
On the handset
MENU ¢ Settings ¢ OK ¢ Handset ¢ OK
¢ Register HS ¢ Enter the base station system
PIN (default setting: 0000)
¢ OK.
Registering flashes in the display.
Registration takes approx. 1 minute.
Charging the battery pack
Plug the mains unit for the charging cradle into the
socket and place the handset in the charging cradle
with the display facing forward.
To charge the battery pack, leave the handset in
t
he base station for approx. 7 hours. The battery
pack is now fully charged. The charge status of the
battery pack is only correctly displayed after unin-
terrupted charging/discharging. Therefore you
sh
ould not interrupt the charging process.
Charging is electronically controlled to prevent
o
vercharging. The battery pack heats up during
charging. This is normal and not dangerous. After
a while its charge capacity will decrease for techni-
cal reasons.
You must set the date and time to ensure that the
times of
calls are logged correctly (see Menu tree
page 7).
Once the phone is registered
and the time set, the
idle display looks as shown on page 1.
If you have any questions about using your phone,
please r
ead the tips on troubleshooting ("Ques-
tions and answers", page 6) or contact our cus-
tomer service department (page 6).
Activating/deactivating the handset
Press and hold the end call key a.
If you place a deactivated handset into the charg-
ing cradle, it will automatically activate itself.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone
network.
~
(Enter the phone number) ¢c.
The number is dialled. (Or you can first pr
ess and
hold
c [dial tone] and then enter the number.)
During the call you can adjust the earpiece volume
using
t.
End the call/cancel dialling:
Press the end call key
a.
You can automatically insert a network provider
diall
ing code before any phone number (see
"Preselection" Menu tree, page 7).
Accepting a call
The handset indicates an incoming call by ringing
and by a display on the screen.
Press the talk key
c to accept the call.
When Aut
o Answer is activated (see Menu tree,
page 7), simply remove the handset from the base
station/charging cradle.
Using the directory and lists
Directory
To open the directory: press h.
You can save up to 40 phone numbers
(max. 32 digits) with corresponding names
(max. 14 characters).
Saving the first number in the directory
h
¢ New Entry? ¢ OK
Storing a number in the directory
h
¢ MENU ¢ New Entry ¢ OK
Please note:
You can also aut
omatically register the Gigaset
AL13H handset to the Gigaset AL130/AL135 base
st
ation. Precondition: The handset is not registe-
red to a base station. Place the handset in the
c
harging cradle of the base station with its dis-
play facing forward.
You will hear a confirmation
tone. Leave the handset in the base station until it
is registered.
Please note:
You can assign a number from the directory to a
k
ey for quick dialling (page 4).
~
Enter number and press OK.
~
Enter name and press OK.
~
Enter number and press OK.
~
Enter name and press OK.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset AL13H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset AL13H in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info