Manual Siemens Gigaset A420A (page 5 of 24) (English)

504633

Zoom out

Zoom in

1/24

Gigaset A420-A420A / Großbritannien / A31008-M2402-L101-1-7619 / Bali.fm / 04.08.2014

Template Bali, Version 1, 16.02.2012

Initial charging and discharging of the batteries

The correct charge status can only be displayed if the batteries are first fully charged and discharged.

Changing the display language

Change the display language if you do not understand the language currently set:

§Menu§ ¤

421

(press the keys one after the other) ¤ q (select language) ¤ §OK§ (‰ = current language)

¤ Press and hold the end call key a to return to idle status.

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be

used.

§Menu§ ¤ q Settings ¤ §OK§ ¤ Date/Time ¤ §OK§ ¤ Date ¤ ~ (enter the day, month and year in 6-digit format)

¤ §OK§ ¤ Time ¤ ~ (enter hours and minutes in 4-digit format) ¤ §OK§ (display message: Saved)

¤ a (press and hold to return to idle status).

You can move the position of an entry to the left or right by pressing the control key left or right r.

Please note

◆ Base station and handset package: The handset is pre-registered with the base station. If you have purchased

a model with multiple handsets, all handsets will already be registered with the base station. You do not need

to register the handset again.

However, if a handset is not registered with the base station (Register HS or Put into base is displayed), please

(¢ page 13).

Handset and charging cradle package: please register the handset manually (¢ page 13).

◆ After the first battery charge and discharge, you may place your handset in the charger after every call.

◆ Always repeat the charging and discharging procedure if you remove the batteries from the handset and rein-

sert them.

◆ The batteries may warm up during charging. This is not dangerous.

◆ After a while, the charge capacity of the batteries will decrease for technical reasons.

Please note

If your phone receives the date and time during calling line display (e.g., via your network provider, a router or

PABXs), you can specify whether this data should be copied to your phone:

¤ Press the key sequence: §Menu§ ¤ P#Q5#MI

The following is displayed; the current setting flashes:

¤ Press one of the following keys to specify, when this data should be copied to your phone:

Q Never

1 Once, in case the date/time is not set on your phone

2 Always

Your selection is displayed (e.g., 2):

¤ Press the display key §OK§.

6 h

¤ Charge the handset in the base station/charging cradle

for 6 hours.

¤ After charging, remove the handset from the base sta-

tion/charging cradle and only replace it when the batter-

ies are fully discharged.

Please note

The handset must only be placed in the designated

Gigaset base station or charging cradle.

973 SET:

[

]

973 SET:

[2]

The manual says thet the call list can be set for either missed calls or the last 25 calls. How do I set it for the last 25 calls? Submitted on 25-8-2020 at 20:20
Reply Report abuse
The manual says that the call list is either missed calls or the last 25 calls. How do I set it for the last 25? Submitted on 25-8-2020 at 20:18
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A420A in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A420A

Siemens Gigaset A420A User Manual - German - 24 pages

Siemens Gigaset A420A User Manual - Dutch - 24 pages

Siemens Gigaset A420A User Manual - French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Siemens Gigaset A420A Manual

Product: