528228
7
Zoom out
Zoom in
Previous page
1/12
Next page
7
Athen / IM-Nord-en / A31008-M1801-R201-2-9W19 / Athen_Kombi_en_neu.fm / 17.09.2008
Picking up a call from the answering machine
You can still answer a call while the answering
machine is recording it by pressing
c or d
(handsfree). Recording stops and you can speak to
the caller.
Activating/deactivating listening in
During the recording of a message you can listen in
via the base station loudspeaker and the registered
handsets (only Gigaset A265), see Menu tree,
page 10.
Setting up the answering machine
The answering machine has already been preset at
the factory. Make individual settings using the
handset.
Setting call acceptance
You can set when you want the answering
machine to accept a call.
MENU ¢ Voice Mail ¢ OK ¢ Ring Delay
¢ OK ¢ Select Immediately / 10 sec / 20 sec /
30 sec / Auto ¢ OK (=on)
Setting the recording time
See Menu tree, page 10.
Assigning key 1 for quick dial to the
answering machine (network mailbox)
Simply press and hold key 1 on the handset and
you will be connected directly to the answering
machine (network mailbox).
See Menu tree, page 10.
Registering corresponding
handsets
You can register up to four handsets on your base
station.
For automatic registration of handsets to
Gigaset A160/A260/A165/A265, see page 3.
Manual registration of handsets to A160/A260/
A165/A265
1. On the handset: MENU ¢ Settings ¢ OK
¢ Handset ¢ OK ¢ Register HS
¢ Enter the system PIN of the base station
(default is 0000)
¢ OK.
Registering flashes in the display.
2. On the base station: within 60 sec. of entering
the system PIN, press and hold the registration/
paging key
÷ or ù (page 1) (min. 1 sec.).
Registration can take up to 5 minutes.
Locating a handset ("Paging")
You can locate your handset using the base station.
Briefly press the registration/paging key ÷ or
ù on the base station (page 1).
All handsets will ring at the same time
("paging"), even if the ringtones are
switched off.
End paging: briefly press the register/paging key
÷ or ù on the base station (page 1) or the talk
key
c on a handset.
Using several handsets
Making internal calls
Internal calls are no-cost calls to other handsets
that are registered to the same base.
Press the INT display key. All handsets are called.
When an internal participant answers you can
speak to them. To end the call, press
a.
Internal consultation call/connecting
acall
You are in conversation with an external partici-
pant. Press the INT display key. All handsets are
called. The external participant hears the hold
music.
Before the internal participant has answered,
press the end call key
a; the call is forwarded
to the participant who answers the call.
After the internal participant has answered,
you can talk to him. Press the end call key
a;
the call is forwarded, or press the
display key;
you are reconnected to the external participant.
Listening in to an external call
You are conducting an external call. An internal
caller can listen in on this call and take part in the
conversation. All the participants are made aware
of the 'listening in' by a beep.
Precondition: The Listening in function must be
activated.
Activating/deactivating internal listening in
MENU ¢ Settings ¢ OK ¢ Base ¢ OK
¢ Listening in ¢ OK (=on)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset A160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset A160 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset A160

Siemens Gigaset A160 User Manual - German - 13 pages

Siemens Gigaset A160 User Manual - Dutch - 14 pages

Siemens Gigaset A160 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info