504623

Siemens Gigaset 5030 Manual

3
Zoom out
Zoom in
Previous page
1/34
Next page
g
i
gase
t
5030
/
IM
eng-
f
ra
/
A30350
-
M207
-
A801
-
5
-
5819
/
5030
_en.
f
m
/
25
.
2
.
11
3
GB
Main menu (first menu level)
To open the main menu:
F Press the menu key.
To access a function in the main menu:
A / C B
Use the Down/Up key to scroll to the function
and press the OK key.
Submenus
To access a function in the submenu:
A / C B
Use the Down/Up key to scroll to the function
and press the OK key.
(If necessary, you can access the next level of
the submenu in the same way.)
The function to be set follows the last selection of a
submenu. A triangle g on the left displays the current
setting or position in the menu.
After pressing the OK key
B, you can make final edits to
the function.
Return (without saving) to exit the menu
While you are navigating through the menu or if you make
settings without having confirmed them with the OK key,
you can go back one step at a time without changing any
settings.
;...; Press the Last number redial key until you
reach the desired menu level or you exit the
menu.
Step-by-step instructions for navigating the menus
Individual steps that you must carry out to navigate the
menu appear in abbreviated form in the user guide, e.g.:
F ¢ Acoustic ¢ SPK Volume
In each case, the arrow ¢ means:
Scroll to the function with the Down/Up key
A / C, then
press the OK key
B.
Finally, press
B again to select the function.
Detailed explanation of the above example:
F Press the menu key.
A Scroll to Acoustic with the Down key.
B Press the OK key.
A Scroll to SPK Volume with the Down key.
B Press the OK key.
If another submenu follows, continue using
A and B
in the same way until the desired function is called.
Making calls
Dialling a number
co Lift handset, dial number.
or ...
o Dial a phone number. If you enter an incorrect
number, press
> to delete it and proceed as
normal.
B/L Press the OK key or L.
After 2 seconds the number is dialled. Lift the
handset if you want to hold the conversation
via the handset.
The
; key can be used to insert pauses when dialling,
starting from the 2nd digit. By pressing
=> you can add
R-key functions to the number.
The approximate length of the call is shown on the display
in minutes and seconds at the end of a call.
Activating/deactivating handsfree talking
With this telephone you can also make calls (handsfree
mode) or settings without lifting the handset if the adapter
is connected. The best distance from the microhone for
speaking is about 50 cm.
◆ Activating during a call via the handset
L + a With the Loudspeaker key pressed replace the
handset.
◆ Activating before dialling the number
L Before dialling: hold down the Loudspeaker
key until you can hear the dialling tone.
Deactivating handsfree talking
c Lift the handset during the call.
Last number redial
The last 5 numbers dialled (up to 32 digits) are saved
automatically. You can retrieve these numbers from the
redial list and dial them again:
Redialling the last number dialled
c; Lift the handset and press the last number
redial key. The last dialled phone number is
dialled immediately.
Ô
> Phonebook
Ó Message
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset 5030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset 5030 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset 5030

Siemens Gigaset 5030 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info