504621
3
Zoom out
Zoom in
Previous page
1/26
Next page
5010
/
EU1
en
g
-
g
r
i
e-cz
/
A30054
-
M6523
-
D801
-
6
-
UG19
/
5010
.
f
m
/
30
.
01
.
2011
2
EN
Setting up the
telephone for use
Recommended
installation of telephone
Do not expose the tele-
phone to direct sunlight or
other sources of heat.
Operate at temperatures
of between +C and
+40°C.
Maintain a distance of at
least one metre between
the telephone and radio
equipment, e.g. radio tel-
ephones, radio pagers or
TV sets. Otherwise, tele-
phone communication
could be impaired.
Do not install the tele-
phone in dusty rooms as
this can limit the service
life of the telephone.
Furniture lacquer and
polish can be adversely
affected by contact with
parts of the unit (e.g.
feet).
Making calls
Dialling a number
co Lift handset, dial
number.
The redial key ; can be
used to insert pauses when
dialling, starting at the 2nd
digit.
Dialling with the repertory
keys
c Lift handset. (If
necessary press
shift key
= for
2nd level reper-
tory key).
: Press repertory
key.
Last number redial
The last number dialled is
automatically saved (max. 32
characters).
c; Lift handset, press
last number redial
key.
Baby call dialling
Requirement: Baby call
(direct call) is activated. The
key
K lights up when the
handset is lifted.
c Lift handset then
press any key
(except
? and
J).
Mute is not possible with the
baby call function.
Mute
You can deactivate the tele-
phone's handset and micro-
phone during a call. You and
the other party will then no
longer be able to hear one
another. The connection will
not be broken; this will be indi-
cated by a waiting melody,
unless you have previously
deactivated the waiting mel-
ody.
J During a call: Press
mute key.
Switch the hand-
set and micro-
phone back on:
Press the key
again.
Saving numbers
Various settings on the tele-
phone have to be completed
with the Set
? key.
To cancel the save or setting
operation (e.g. after an incor-
rect entry) without saving,
replace the handset instead of
pressing
?. The original
setting is then retained.
When saving numbers,
pauses can be inserted by
pressing
; (not at the
1st digit!).
When saving numbers, the
last number dialled can be
inserted at the 1st digit by
pressing
; (max. 32
digits).
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset 5010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset 5010 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset 5010

Siemens Gigaset 5010 User Manual - German - 10 pages

Siemens Gigaset 5010 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info