522450
5
Zoom out
Zoom in
Previous page
1/7
Next page
5005
/
IM2
/
A30054
-
M6522
-
A801
-
6
-
UR19
/
5005
.
f
m
/
27
.
02
.
2011
3
EN
Dialling pauses
One or more dialling pauses
(not at 1st digit) can be
entered using
<. Pauses
are transferred to the memory
and are necessary for certain
extension systems (e.g.:
0
< 2368).
Dialling a dialling pause
within the first 5 digits:
The entire number saved is
dialled, including the
2-second dialling pause.
Dialling a dialling pause
after the first 5 digits:
The portion of the number
saved after the pause is
only dialled after pressing
the
< key.
Adjusting the
telephone
Setting the handset
volume
The handset volume can be
set to 2 levels.
E Press Handset vol-
ume control key.
Mute
You can deactivate the tele-
phone's microphone.
During a call:
J Press mute key.
To reactivate microphone:
Press the mute key again.
Setting the ringer
You can set the ringer fre-
quency and volume to 9 levels
(factory default: level 6) or
turn it off.
c? Lift the handset,
press the Set key.
# Press the hash key.
0...9 Press one of the
number keys. (0:
Ringer off until
handset is next
lifted).
? Press Set key.
Operation on a PABX
Special functions/Recall
key
During an external call, you
can make an enquiry or for-
ward the call. To do this, press
the recall key
>
. The
subsequent procedure
depends on your PABX.
By default, the recall key is set
to flash time 1 (pulse/tone
switch in "Tone 1" position).
For connection to a PABX, it
may be necessary to change
the flash time (e.g. pulse/tone
switch to "Tone 2"). To do this,
please refer to the operating
instructions for your PABX.
Changing the dialling
mode
By default, your telephone is
set to tone dialling mode
(Tone 1). Depending on the
dialling mode of your PABX,
you may need to set the tele-
phone to pulse dialling (DP).
Slide switch on underside of
unit:
Temporary DTMF switching in
"Pulse" position
To use functions that require
DTMF (e.g. remote control of
answering machine), you can
set the telephone to DTMF for
the duration of the call with-
out adjusting the switch.
After the connection is estab-
lished:
* Press the star key.
After the connection is bro-
ken, the setting reverts to DP.
Pulse: Pulse dialling mode (DP)
Tone 1: Tone dialling mode, flash time
100 ms
Tone 2: Tone dialling mode, flash time
280 ms
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens Gigaset 5005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens Gigaset 5005 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens Gigaset 5005

Siemens Gigaset 5005 User Manual - German - 6 pages

Siemens Gigaset 5005 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info