521718
2
Zoom out
Zoom in
Previous page
1/20
Next page
CM2N3204E / 1.1999 Siemens Building Technologies
2/20 Landis & Staefa Division
supervise
- the air flow in air ducts
- overloads of circulators, fans and chillers
- overtemperatures of electric air heater batteries
- risk of fire or smoke
- risk of frost
Name Type reference Remarks
FLN communication insert AZI65.1 Not included in delivery
Instructions (de, fr, it) ARG65.43 Included, if ordered
Instructions (en, sv, fi, no) ARG65.44 Included, if ordered
Instructions (nl, es, da) ARG65.45 Included, if ordered
When ordering the controller, please give type reference RWI65.02. To ensure the unit
will be supplied with the correct language version of the instructions (operating card 2,
operating instructions and mounting instructions), please also indicate the type refer-
ence of the instructions required, e.g. ARG65.44 (for English, Swedish, Finnish,
Norwegian).
To order the communication insert, please give type reference AZI65.1.
Controller and, if required, communication insert are packed separately and are also
supplied as separate units.
Name Type reference Data sheet
Temperature detector QAA24, QAA26 1721
QAM22..., QAE21.9..., QAE22… 1771, 1792, 1791
QAD22..., QAC22, QAA64 1801, 1811, 1722
QAF63.2, QAF63.6 1821
CO
2
/VOC sensor QPA62... 1951
Remote setting unit QAA26 1721
FZA21.21, FZA61.11 3470, 3471
Signal source RVL55, RZF61.100 2602, 3472
RZM61.400, PTM1.2Y10 3474, 8161
Actuator SQ...6... 4553, 4574, 4685, 4686
Automatic detector identification (ASD logic), including type of detector (active or pas-
sive). Automatic activation of optimum controller configuration through ACC logic which,
via ASC, identifies the intended use of the control function. This means that the control
will be optimally matched to the plant. P-band and integral action time (TN) are sepa-
rately adjustable, so that P-control (with integral action time TN = 0) or PI control can be
selected.
The controller is supplied as a PI controller. The setpoints of heating and cooling can be
adjusted separately. Overlapping of heating / cooling sequences is not possible.
For the control of mixed air dampers or HR equipment, both the operating action and
the operating mode can be selected.
The actual values of the various outputs are permanently displayed.
Accessories
Ordering
Equipment
combinations
Technical design
Control
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Siemens AEROGYR RWI65.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Siemens AEROGYR RWI65.02 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Siemens AEROGYR RWI65.02

Siemens AEROGYR RWI65.02 User Manual - German - 50 pages

Siemens AEROGYR RWI65.02 Usermanual and installation guide - Dutch - 73 pages

Siemens AEROGYR RWI65.02 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info