Manual Showtec Phantom 75 LED Spot (page 24 of 28) (English)

613044

Zoom out

Zoom in

1/28

Fig. 8

3. Loosen the service lid of the housing, by sliding it to the left/right.

4. Gently tilt the head so the small metal housing will slide out more easy.

5. Turn the gobo wheel, with the gobo you want to remove, to the upside.

6. Gently lift up the gobo holder 10º and then gently pull out the gobo from its position.

Fig. 9

7. Very carefully take the gobo out of the gobo holder with a pair of pliers.

8. Place the new gobo in the gobo holder. Carefully put the pinchcock back, gently press the

pinchcock a little bit together. Possibly use a pair of pliers to press the pinchcock a little bit together.

9. Put the gobo holder back under the pressing snap and push it back.

10. Replace the maintenance caps and fasten all screws.

Glass Gobo Orientation

Coated glass gobos are inserted with the coating against the rim of the holder (away from the spring).

Textured gobos are inserted with the smooth side against the spring. This provides the best results when

combining rotating gobos.

When an object is held up to the coated side When an object is held up to the uncoated

there is no space between the object and its side there is a space between the object and

reflection. The back edge of the gobo cannot its reflection. The back edge of the gobo can

be seen when looking through the coated be seen when looking through the uncoated

side. side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Showtec Phantom 75 LED Spot in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Showtec Phantom 75 LED Spot Manual

Product: