727479
22
Zoom out
Zoom in
Previous page
1/25
Next page
21
4. Test Run
Make sure all the pipe joints have been screwed tightly, then clean the pipes and verify
the vacuum.
Remove the valve core copper caps of the high pressure valve and the low pressure
valve.
Remove copper cap of refrigerant-adding valve, measure the vacuum with the vacuum
pump (value should be less than 10Pa)
Close the copper cap of refrigerant-adding valve.
Unscrew the high pressure valve and low pressure valve.
Use the leakage detector or soapy water to check the system pipe joint and valve cap for
leakage.
If there is no leakage, screw tightly the copper caps of valve cores
.
3-5 Installation of the exterior draining pipe
Insert the drainage pipe into the hole of the base, connect an extending pipe to drain the
water.
Base hole of the outdoor unit catchment trough
4-1 Pipe-cleaning and vacuum verification
4-2 Test Run Procedure
Before testing, please check all the connecting wires and pipes carefully to see if they
are correctly connected, verify if the stop valve is completely opened or closed, and if
the air conditioner has been grounded correctly.
Connect the air conditioner system to the power source, a “Du” sound emitted by the
indoor buzzer should be heard.
Turn the air conditioner ON with the remote control.
Please choose the “heating” mode and set temperature at 25
0
C to check the heating
function. Please choose the “cooling” mode, set temperature at 16
0
C to check the
cooling function
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shinco KFR-35GWZ-BM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shinco KFR-35GWZ-BM in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info