ENGLISH
23
Operating the sleep timer
• The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting off.
• To set the receiver to automatically turn off after the
specified period of time.
• Each time this button is pressed, the sleep time
changes and disappears in 3 seconds as follows;
10 20 30 60 90 OFF
Unit : minutes
• While operating the sleep timer, “SLEEP” lights up.
Compressing the dynamic range (Dolby Digital sources only)
• This function compresses the dynamic range of previously
specified parts of the Dolby Digital sound track(with
extremely high volume) to minimize the difference in
volume between the specified and non-specified parts.
This makes it easier to hear all of the sound track when
watching movies at night at low levels.
• When the digital signals from Dolby Digital program
source are input in available surround mode.
• Each time this button is pressed, the mode changes
and disappears in 3 seconds as follows:
DYNR 0.0 : Off
DYNR 0.5 : Low compression
DYNR 1.0 : High compression
• In some Dolby Digital software, this function may
not be available.
• Each time this button is pressed, the brightness of
fluorescent display changes as follows;
ON dim OFF
• In the display OFF mode, pressing any button will
restore the display ON mode.
• The audio signal from the CD and the video signal
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
Note : Be sure to observe the order of the above steps
1 and 2.
Start recording on the VIDEO 1.
3
Adjusting the brightness of the
fluorescent displays
Start play on the VIDEO 2 and the CD
respectively.
4
OTHER FUNCTIONS
