618051
6
Zoom out
Zoom in
Previous page
1/9
Next page
5
CAUTION
If you hear any unusual leaks (i.e., leaks other than a tiny amount of air coming
from the dry air bleed valve), turn the tank valve off. Do not use the regulator until
the source of the leak has been found and corrected by an authorized Sherwood
Scuba service technician.
4. DO NOT at any time lift the tank/BC assembly by the regulator or hoses.
CAUTION
Lifting the tank by the regulator or hoses may loosen a previously tight
connection, which could cause unexpected air loss and put the diver at risk
during a subsequent dive.
5. Surface test the regulator by breathing lightly through the mouthpiece. Purging the
regulator above the water’s surface is NOT an appropriate method for testing the
function of the regulator.
3.2 POST-DIVE CARE
1. After the dive, blow all water out of the dust cap with clean dry air and place the cap
securely on the regulator inlet. On multiple tank dives, keep salt water out of the
regulator inlet when changing the tanks. Neglect of these simple procedures is a
major cause of corrosion and wear in scuba regulators. Sherwood’s exclusive Dry
Air Bleed System keeps all other water-borne contamination out of the first stage
body.
NOTE: A tiny stream of bubbles escaping from a small black valve on the first stage
indicates that the Dry Air Bleed System is working. The amount of air used is negligible
(13-25 cc/min.). Check the system periodically, particularly after servicing, to ensure
that there is some air escaping from the black one-way bleed valve. If no air is escaping
from the valve when air pressure is applied to the first stage, you should have the
regulator inspected by your authorized Sherwood Scuba dealer.
2. With the dust cap securely in place, rinse the first and second stage in clean fresh
water. DO NOT purge the regulator before or during rinsing since this may introduce
water into the second stage and the low pressure hose. Shake or blow all excess
water from the second stage and allow the entire regulator to air dry before storing.
3. Store the regulator in a clean bag or storage box, away from sunlight, excessive
heat and humidity.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sherwood OCTOPUS - Scuba regulator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sherwood OCTOPUS - Scuba regulator in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info