16855

Sharp UX510 Manual

85
Zoom out
Zoom in
Previous page
1/114
Next page
Setting 9: TAD CONNECTED
Press "1" (YES) if an answering machine is connected to the fax and turned on,
or "2" (NO) if not. See Chapter 7 for more details on using an answering
machine hookup.
(Note: Select "NO" if you are using the distinctive ring function.)
• Initial setting: "2"
Setting 10: QUIET DETECT TIME
This sets the duration of silence (in seconds) after which the fax will take over
the line and begin reception when an answering machine is connected. Enter a
number from "01" to "10", or enter "00" to turn off the function. (This setting
is described in more detail in "Optional Hookup Settings" in Chapter 7.)
(Note: We recommend that you do not set Quiet Detect Time below 3 seconds.)
• Initial setting: "04"
Setting 11: FAX RECEPTION WHEN TAD FAILS
Press "1" (YES) to have the fax answer a call if an answering machine
connected to the fax does not answer within 5 rings. Press "2" (NO) to turn the
function off. (This setting is described in more detail in "Optional Hookup
Settings" in Chapter 7.)
• Initial setting: "2"
Setting 12: DISTINCTIVE RING
This sets the ring pattern to which your fax will answer if you subscribe to a
distinctive ring service. Enter a number from "1" to 5" to select a pattern. See
"Distinctive Ring" in Chapter 2 for more details.
• Initial setting: "5"
Setting 13: FAX SIGNAL RECEIVE
Your fax is set to automatically begin reception if you hear a high-pitched fax
tone after answering a call on your fax or an extension phone. If you use a
computer fax modem to send documents on the same line, you must turn this
setting off in order to prevent your fax from mistakenly attempting to receive
documents from the computer fax modem. Press "1" to turn the setting on, or
"2" to turn it off.
• Initial setting: "1"
Chapter 9 Optional Settings
75
… 85 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp UX510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UX510 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info