Manual Sharp UX510 (page 29 of 114) (English)

16855

Zoom out

Zoom in

1/114

Selecting the Reception Mode

Your fax has two modes for receiving incoming calls and faxes:

AUTO mode: In AUTO mode, the fax will automatically answer all calls after

four rings and receive the incoming document.

MANUAL mode: In MANUAL mode, you must answer all calls, including fax

messages, using the fax’s handset or an extension phone connected to the same

line.

If you only intend to receive fax messages on the line connected to your fax ma-

chine, select AUTO mode. In this case, you will probably want to change the

number of rings your fax waits before answering to one or two rings. This is

done by setting Option Setting 2 as described in Chapter 9, "Optional Settings".

If you intend to receive both fax messages and voice calls on the line connected

to your fax machine, you can use either AUTO or MANUAL mode. In the case

of AUTO mode, you must answer incoming calls before the fax does, but the

fax will be able to receive fax messages at times when you are unable to answer

personally. For more information on using AUTO and MANUAL modes, see

Chapter 4, "Receiving Documents".

Setting the reception mode

Set the mode of reception with the

RECEPTION MODE key on the panel.

•• To select AUTO, press the key until

"AUTO" appears in the display.

•• To select MANUAL, press the key un-

til "MANU" appears in the display.

RECEPTION

MODE

Chapter 2 Initial Settings

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp UX510 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp UX510 Manual

Product: