67707
36
Zoom out
Zoom in
Previous page
1/44
Next page
Aansluiten van een PC
Handmatig instellen van het PC-beeld
Gewoonlijk kunt u de positie en de toestand van het
beeld gemakkelijk instellen met Auto Sync. In sommige
gevallen is het echter nodig om de instellingen
handmatig te maken voor het optimaliseren van het
beeld.
Druk op a/b om het onderdeel te selecteren
dat u wilt instellen.
Druk op c/d om de gewenste waarde in te
stellen.
1
2
Kiezen van de ingangsresolutie
Sommige ingangssignalen moeten handmatig worden
geregistreerd om juist te kunnen worden weergegeven.
De twee ingangssignalen (resoluties) in de onderstaande
lijst kunnen niet van elkaar onderscheiden worden wanneer
ze worden ontvangen. In dit geval dient u het juiste signaal
handmatig in te stellen. Nadat dit eenmaal is gebeurd,
zal het signaal (resolutie) correct worden weergegeven
wanneer het opnieuw binnenkomt.
1024 x 768
1360 x 768
OPMERKING
U kunt alleen het “Ingangssignaal” in het Instellingen menu
selecteren bij ontvangst van een van de 2 bovenstaande
ingangssignalen.
(Voorbeeld)
Instellingen
H-Pos: Centreren van het beeld door dit naar links of
rechts te schuiven.
V-Pos: Centreren van het beeld door dit naar boven of
beneden te schuiven.
Klok: Afstellen van het beeld wanneer er verticale strepen
in flikkeren.
Fase: Afstellen van het beeld wanneer letters weinig
contrast hebben of als het beeld flikkert.
Fijn Sync.
Instellingen
OPMERKING
Om alle onderdelen op de fabrieksinstellingen terug te
zetten, drukt u op a/b om “Reset” te selecteren en dan
drukt u op OK.
“Klok” en “Fase” in het “Fijn Sync.” menu kan alleen
worden afgesteld bij analoge ingangssignalen.
Ingangssignaal
Instellingen
Automatisch instellen van het PC-beeld
Met deze functie kan het beeld automatisch op de
best mogelijke toestand worden ingesteld wanneer de
analoge aansluitingen van de TV en de PC met een
los verkrijgbare DVI/D-sub omzettingskabel enz. met
elkaar zijn verbonden.
30%
OPMERKING
Wanneer “Auto Sync.” succesvol is, verschijnt het bericht
“Auto Sync met succes afgesloten”. Indien niet, dan is
“Auto Sync.” mislukt.
“Auto Sync.” kan toch mislukt zijn, ook al verschijnt het
bericht “Auto Sync met succes afgesloten”.
“Auto Sync.” kan mislukken als het computerbeeld een
lage resolutie heeft, als er onduidelijke (zwarte) randen zijn
of als het beeld wordt verplaatst terwijl “Auto Sync.” wordt
uitgevoerd.
U moet de PC op de TV aansluiten en daarna inschakelen
voordat u “Auto Sync.” start.
“Auto Sync.” kan alleen worden uitgevoerd bij ontvangst
van analoge ingangssignalen via de EXT 7 aansluiting.
Auto Sync.
Instellingen
Reset
H-Pos [ 90] a b
a b
a b
a b
V-Pos
Klok
Fase
[ 39]
[ 90]
[ 20]
34
LC-42X20E-nl.indd 34LC-42X20E-nl.indd 34 2007/09/04 16:35:012007/09/04 16:35:01
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-52X20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-52X20 in the language / languages: Dutch as an attachment in your email.

The manual is 7,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info