662081
52
Zoom out
Zoom in
Previous page
1/56
Next page
Appendix
Wall mounting
NOTE
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.
• To use this TV mounted on a wall, fi rst remove the cover at the 4 locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
Hanging on the wall
AN-37AG2 / AN-37P30 wall mount bracket. (See the bracket instructions for details.)
Vertical mounting Angular mounting
Handling and precautions with the wall-mounted TV
You can mount the TV on the wall using the optional AN-37AG2 bracket and AN-37P30 attachment.
For details, refer to the instructions supplied with the optional bracket.
NOTE
• The AN-37P30 attachment is always required when attaching the AN-37AG2 bracket to a wall.
CAUTION
This TV should be mounted on the wall only with the AN-37AG2 (SHARP) / AN-37P30 (SHARP) wall mount bracket.
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service personnel about using an optional AN-37AG2 bracket and AN-37P30 attachment to mount
the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
0
/
5
/
1
0
/
1
5
/
2
0
°
AN-37AG2
k
AN-37P30
About setting the TV angle
50
Mount the bracket on the wall by positioning the bracket’s mark that indicates the display’s
centre onto the intersecting point.
The following measurement fi gures are rough estimates. The fi gures differ according to the location where you attach the TV.
Mark the monitor’s outline by placing tape at four points on the wall where the LCD-TV’s four
corners’ will lie when it is installed.
• When you mark the monitor’s outline on the wall, make sure that the vertical and horizontal lines are made accurate
to the TV’s dimension.
• Use adhesive tape that will not leave permanent marks.
1
Make diagonal lines from the four corners and mark their intersecting point.
• Diagonally stretch string and mark the intersecting point in a way that no permanent marks will be left on the wall.
2
1
Remove the cover from the stand.
2
Remove the screws.
3
Unfi x the TV stand.
4
Fix the wall mount bracket to the LCD-TV.
5
When adjusting the bracket’s angle, adjust it before installing the TV on the wall.
• The adjusting angles are 0°, 5°, 10°, 15° and 20°.
6
Attach the TV to the wall mount bracket.
• Attach the TV by aligning the monitor’s four corners with the wall markings.
• When you adjust the TV’s angle, make sure to remove the monitor from the wall.
4
3
NOTE
• The above description is for reference. Please mount the TV in a way which properly suits the location.
Remove the tape and the string from the wall.
5
37GX3H_en_h.indd 5037GX3H_en_h.indd 50 2007/11/14 11:05:042007/11/14 11:05:04
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-37GX3H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-37GX3H in the language / languages: English as an attachment in your email.

The manual is 8,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info