66383
40
Zoom out
Zoom in
Previous page
1/42
Next page
38
Troubleshooting
Problem
AV Link does not function
Various characters are displayed incorrectly in
analogue teletext mode
No sound via external digital audio ampli er
The station overview doesn’t show any
encoded stations, although the CI module and
smart card are plugged in.
The Picture-in-Picture (PIP) function is not
available.
I’ve changed the CI module and smart card,
but I can’t nd the stations from the new
provider in the station list.
Possible cause
a) Euro AV cable is not fully wired
(pin 10 not wired)
b) Some video recorders can only take over the
stations in rst time operation of the TV
c) All or some terrestrial and cable programs
are stored at program places greater then 99
The wrong character set is set in the teletext
menu
a) The external digital audio ampli er does not
support the selected sound format (Dolby
Digital, dts, MPEG)
b) TV set and external digital audio ampli er are
not connected.
The CI module and / or smart card may not be
plugged in correctly (see the section entitled
“Inserting the Common-Interface module”, see
page 10). If no information appears for the CI
module, smart card or CI software, the module
or card has not been installed correctly.
Possible solution
a) Replace the Euro AV cable
b) Restore the video recorder to the as-deliv-
ered state (see recorder manual)
c) Resort the terrestrial and cable programmes
so that they come to rest between 1 and 99.
Set the right character set: Teletext menu
– Setup – Character set: standard or the ap-
propriate character set.
a) Set PCM stereo on the DVD player in the
sound selection. Switch language/sound
selection (green button) to Stereo in the
DVB programme on the TV set in the status
display (END).
b) Connect Digital-Out from the TV set to a
Digital-In of the external audio ampli er and
select the appropriate input on this.
Plug in the module and card correctly and
repeat the station search process (see page 13)
You are trying to watch two digital stations at
once. However, you can only watch one ana-
logue and one digital station at the same time.
When you exchange a CI module, you will need
to carry out the station search process again
before you will be able to watch the stations
provided by a new provider (see page 13).
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-32GD7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-32GD7 in the language / languages: English as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info