13291
37
Zoom out
Zoom in
Previous page
1/39
Next page
35
Troubleshooting
Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
Problem Check item Reference page
There is no
picture or
sound.
Make sure the AC cord is properly inserted in the power
outlet.
Reception other than those of broadcasting stations can
be considered.
Make sure the input mode is set to TV.
Make sure the POWER switch of the main unit is on.
9
17
16
There is no
picture.
There is no
picture from
INPUT1/2/3.
Make sure the BRIGHTNESS is properly adjusted.
Fluorescent lamp may have reached the end of service
life.
Make sure the S-VIDEO terminal has nothing connected.
Make sure the AUDIO ONLY is not set to ON.
21
36
13
32
There is no
sound.
Make sure the volume is not set to minimum.
Make sure the sound is not set to mute.
Make sure that headphones are not connected.
17
17
10
There is no
picture or
sound, just
noise.
Make sure the antenna cable is properly connected.
Bad reception could be the problem.
8, 9
Picture is not
clear.
Make sure the antenna cable is properly connected.
Bad reception could be the problem.
8, 9
Picture is light
or improperly
tinted.
Check color adjustment.
Check COLOR SYSTEM setting.
21, 22
25
The picture is
too dark.
Press the BACKLIGHT button or set the BACKLIGHT or
BRIGHTNESS settings.
Check CONTRAST and BRIGHTNESS adjustment.
Fluorescent lamp may have reached the end of service
life.
21
21
36
Remote control does not work.
Check the batteries of the remote control.
Make sure the remote sensor window is not in strong
lighting.
7
7
The clock (AUTO CLOCK) cannot
be set.
The broadcasted EDS signal may be weak. Check the
antenna.
Carry out EZ SETUP or Setting the CLOCK again.
If EDS signal is not sent, set the clock using MANUAL
CLOCK Setting.
14, 15, 24
15
Unit cannot be operated.
External influences such as lightning, static electricity,
etc., may cause improper operation. In this case,
operate the unit after first turning the power off, or
unplugging the AC cord and re-plugging it in 1 or 2
minutes.
Sound
Picture
Picture
LCD TV set
LC-20S5U_E.indb 35 2005/12/15 11:20:01
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp LC-20S5U Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp LC-20S5U Operation Manual in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info