770392
126
Zoom out
Zoom in
Previous page
1/128
Next page
EN - 17
connection connection, which complies
with the provisions of current regulati-
ons and is in good working order.
The fused switch is easily accessible
once the hob has been installed.
If there is no dedicated hob circuit and
fused switch, they must be installed by
aqualiedelectricianbeforethehobis
connected.
An approved suitable cable must be
connected from the Consumer Unit
(main fuse box) and be protected by
its own 50amp fuse or Micro Circuit
Breaker (MCB). The electrician must
provide a fused all pole switch, which
disconnects both the line (live) and
neutral conductors with a contact sepa-
ration of at least 3.0 mm.
Thefusedswitchshouldbettedtothe
kitchen wall, above the work surface
and to the side of the hob, not above
it, in accordance with IEE regulations.
Connect the fused switch to a junction
boxwhichshouldbettedonthewall
about61cm(24inches)aboveoorle-
vel and behind the hob. The hob’s po-
wer supply cable can then be connec-
ted. Connect one end to the junction
box and connect the other end to the
hob’s power connection box which is
located at the back of the hob. Remove
the cover of the power connection box
and install the cable, in accordance
with the connection diagram.
The power supply cable must be posi-
tioned away from direct heat sources.
For the induction hob, the cable must
be H05VV-F 3X4 mm² 60227 IEC 53
••.Youwillndtheconnectiondiagram
shown on the bottom of your appliance.
ERROR CODES
If there is an error, error code will be
showed at heater displays.
E1 : The cooling Fan is disabled, call
an authorized service agent.
E3 : The power supply voltage is over
the rated values, turn the hob off by
touching ,wait until “H” disappears
for all zones, turn the hob on by pres-
sing and continue
to use. If same error appears, call an
authorized service agent.
E4 : Supply frequency is different from
the rated values, turn the hob off by
touching , wait until “H” disappe-
ars for all zones, turn the hob on by
pressing and continue to use. If
same error appeals, plug off/on turn
the hob on by pressing continue
to use it. f same error appears, call an
authorized service agent.
E5 : The hob inside temperature is too
high, turn the hob off by pressing
N
L3 L2 L1
4
3 2 1
5
PEN
L3 L2 L1
4
32 1
5
PE
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp KH-6I31BS00 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp KH-6I31BS00 in the language / languages: English, German, Danish, Spanish as an attachment in your email.

The manual is 4.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp KH-6I31BS00

Sharp KH-6I31BS00 User Manual - Dutch - 127 pages

Sharp KH-6I31BS00 User Manual - French - 114 pages

Sharp KH-6I31BS00 User Manual - Italian, Polish, Norwegian - 127 pages

Sharp KH-6I31BS00 User Manual - Finnish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info