17541
63
Zoom out
Zoom in
Previous page
1/66
Next page
40
Error Messages (cont.)
CHECK FUSER UNIT
320: FUSER UNIT MISSING
The Problem
The fuser is not properly installed.
What to Do
Open the top cover and check the
fuser:
1. Press down on the fuser to be sure it
is firmly locked in place. The
message should disappear.
Note: If the message still appears,
push the blue latches at
either end of the fuser back
(toward the printer cover
hinge) and lift the fuser out,
then lower it back into the
printer, pushing it firmly
down in place. You should
feel the latches at either end
engage.
2. Close the cover.
XXX TONER SENSOR ERROR
The Problem
Appears on the second line of the
display to indicate that there is a
problem with the color xxx toner
sensor.
What to Do
Turn the printer off, then on again. If
this does not clear the message, call
your local service dealer.
DISK FILE SYSTEM FULL
The Problem
The printer’s internal hard drive does
not have enough memory to print the
current job.
What to Do
Either print out or delete some of the
files already on the printer’s hard drive
(see pages 17 and 18).
Note: You can also use the Storage
Device Manager utility to clean
up the printer’s hard disk drive.
See your on-line User’s Guide
for more information.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARC240P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARC240P in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info