26396
87
Zoom out
Zoom in
Previous page
1/116
Next page
85
8
TD CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TONER IS LOW" will appear
in the display. For information on purchasing a new TD cartridge, see "ABOUT
SUPPLIES AND OPTIONS" (p.91). If copying is continued while the indicator is lit,
copies will gradually become lighter until the toner runs out. When the toner runs
out, the machine will stop operating, the error indicator will blink, and "REPLACE
THE TONER CARTRIDGE" will appear in the display. Follow the procedure below to
replace the TD cartridge.
1
Open the bypass tray, side cover, and front cover, in that order.
To open the bypass tray, see "Loading paper in the bypass tray" (p.22). To
open the side cover and front cover, see "INSTALLING THE TD
CARTRIDGE" (p.14).
2
Gently pull the TD cartridge out
while pressing the lock release
button.
3
Install a new TD cartridge. To install the new cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.14).
4
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The error
indicator will go out and the ready indicator will light up.
After the machine stops, it may be possible to make a few more
copies by taking the TD cartridge out of the machine, shaking it
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the TD cartridge.
During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key ( ) to resume copying.
In order to help preserve the global environment, we recycle used TD
cartridges. Please read "COPIER TONER CARTRIDGE RECYCLING
PROGRAM", which is enclosed in the new toner cartridge package.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Note
Lock release button
Note
Caution
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp AL1651CS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AL1651CS in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info