Manual Sharp 25N-M180 Operation Manual (page 36 of 40) (English)

13181

Zoom out

Zoom in

1/40

Operation of Remote Control (Continued)

Anvision ____________

Cable Star ___________

Eagle ______________

Eastern International __

General Instrument ____

Hamlin _____________

Jerrold ______________

Macom _____________

Magnavox ___________

NSC _______________

Oak ________________

Oak Sigma __________

Panasonic ___________

Philips ______________

Pioneer _____________

Randtek ____________

RCA _______________

Regal ______________

Regency ____________

Scientific Atlantic ______

Sony _______________

Sylvania ____________

Teknika _____________

Texscan ____________

Tocom ______________

Unika ______________

Viewstar ____________

Zenith ______________

07, 08

04, 05, 15, 23, 24, 25,

30, 36

12, 13, 34

04, 05, 15, 23, 24, 25,

30, 36

07, 08, 19, 25, 28, 29,

32, 33, 40, 41

01, 16, 38

27, 39

07, 08, 19, 26, 28, 29,

32, 33, 40, 41

18, 20

07, 08

27, 43

12, 13

03, 22, 42

17, 21

07, 08, 19, 26, 28, 29,

32, 33, 40, 41

CATV CONVERTER

BRAND

REMOTE CONTROL

CODE NUMBER

NOTE:

Some satellite receivers can be operated by the

REMOTE CONTROL. If you have a Satellite

Receiver, you can use the above method to search

for available channels.

(1) Slide

TV-CATV

switch to CATV.

(2) Press and hold down

DISPLAY

and

CH DOWN (

)

on your remote control.

Then release both buttons.

(3) Within ten seconds after releasing

DISPLAY

and

CH DOWN (

)

, enter your converter’s two-

digit code number using

REMOTE KEYPAD

(refer to list).

• The remote control is now ready to send

commands to your converter.

• Some brands have more than one remote code

listed due to changes in the remote codes from

early to later model years. In such cases, you

may have to try more than one code to find the

code your converter accepts.

NOTE:

Depending on the model, year produced, brand,

and type of CATV converter, some models may

not be compatible with the remote control.

L To Identify Your Cable Converter – Search

Method.

(1) Slide

TV-CATV

switch on the remote to CATV.

(2) Press the POWER button on the cable

converter to ON.

(3) Stand at least six feet away from the converter.

Point the remote towards the converter.

Hold down the

DISPLAY

and

CH UP (

)

the same time. KEEP HOLDING THE

BUTTONS DOWN.

(4) Watch the Channel Number indicator on the

converter.

Channel numbers will scan up when the

converter has been identified.

Release the

DISPLAY

and

CH UP (

)

as soon

as the channel numbers start to scan up.

The converter’s remote control code number

has been identified, and the remote is ready to

operate the converter.

TIPS ON IDENTIFYING YOUR CABLE

CONVERTER:

Be Patient: a minute or two can seem a lot

longer when you’re waiting for something to

happen, but the code should be identified

within two minutes. Remember, it is only a

one-time set-up.

Be careful not to let the CATV converter scan

more than five channels when the indicator

starts to move up. If you continue holding down

the

DISPLAY

and

CH UP (

)

after five channel

scans, the proper remote code can be passed

up, and the two minute identify cycle will have

to be repeated.

If a channel change does not occur on the cable

converter within two minutes, read the

identifying instructions again and repeat the

steps. Should a channel change still not occur,

the remote will not operate with the desired

converter.

33-40/25N-M180 w/Imp. Safe 6/6/00, 9:44 AM36

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 25N-M180 Operation Manual in the language / languages: English as an attachment in your email.

The manual is 4,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp 25N-M180 Operation Manual Manual

Product: