576378
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
FREEPHONE 0800 862 0453
CAUTION: Do not clean the unit
while it is charging.
1 Once a month, wipe down the
unit with a dry cloth, including
the area under the No Touch
Dust Cup. Wipe away any hair,
fibre or other dirt that may have
built up in the chamber and on
the rotating brush. Do not use
any harsh cleaner or chemicals.
2 Do not immerse the unit in
water.
CLEANING THE ROTATING
BRUSH
1 Press the No Touch Dust Cup
release pedal with your foot and
remove the No Touch Dust Cup
from the unit.
2 Turn the unit upside down. Be
careful not to accidentally turn
the unit on!
3 Remove all hair, string or fibres
wrapped around the brush bar.
Using a pair of scissors, carefully
cut along the raised guide to
remove anything wound around
the brush bar. Avoid damaging
or cutting the bristles. (Fig. 12)
Fig. 12
Fig. 15
Fig. 16
MAINTENANCE
4 Use a coin to remove the trap
door if you need to remove the
brushroll to either clean it or
replace it. (Fig. 13)
REMOVING AND REPLACING
THE BATTERY
NOTE: Make sure the charging
adaptor is not connected to
the sweeper when removing or
replacing the batteries.
NOTE: If uncertain as to how
to remove your battery pack,
we suggest you take the unit
to a reputable small appliance
service technician to have this
service performed.
1 Make sure the unit is off. If not,
press the power button once to
turn the unit “OFF”. (Fig. 14)
2 Turn the unit upside down.
3 Push in the locking tab and lift
off the battery compartment
cover. (Fig. 15)
4 Carefully lift out the battery
pack and disconnect the wire
terminals by pressing on the
latch and pulling apart the wire
terminal connectors. (Fig. 16)
5 Remove the battery pack.
(Fig. 16)
6 Connect the wire terminal from the
unit to the wire terminal connector
of the new Shark
®
battery pack
(XBT V3900) and replace the
battery pack into the unit.
7 Replace the battery
compartment cover.
8 Please call customer service at
0800 862 0453 if you have any
problems removing the battery
pack.
IMPORTANT: This appliance
contains Li-Ion batteries. The
batteries must be recycled or
disposed of in accordance with
local regulations. Please consult
your local recycling centre for
more information.
WARNING: Never use ordinary
batteries for replacement as
these may leak and cause
damage. Use only battery pack
XBTV3900 for replacement.
LI-ION BATTERY
MUST BE RECYCLED
OR DISPOSED OF
PROPERLY
Fig. 13
Fig. 14
OFF
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark V3900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark V3900 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info