668672
2
Zoom out
Zoom in
Previous page
1/2
Next page
Cleaning & Changing the HEPA Dust Cup Filter cont.
Cleaning & Changing the HEPA Dust Cup Filter cont.
3. Rotate the lower dust cup clockwise
to separate it from the filter chamber.
Empty and clean the dust cup. (See
illustration below.)
Filter
Chamber
Dust
Cup
Debris
Screen
7. “TapClean” the Debris
Screen or rinse under
a faucet until clean.
(See illustration at
right.) Remember that
the Debris Screen
must be completely
dry before reinstalling
in the vacuum.
3. Rotate the lower dust cup clockwise
to separate it from the filter chamber.
Empty and clean the dust cup. (See
illustration below.)
Filter
Chamber
Dust
Cup
Debris
Screen
7. “TapClean” the Debris
Screen or rinse under
a faucet until clean.
(See illustration at
right.) Remember that
the Debris Screen
must be completely
dry before reinstalling
in the vacuum.
8. Replace the Debris Screen on the
HEPA Dust Cup Filter and reinstall
filter assembly in the vacuum. (not
shown)
8. Replace the Debris Screen on the
HEPA Dust Cup Filter and reinstall
filter assembly in the vacuum. (not
shown)
NOTE: DO NOT OPERATE VACUUM WITHOUT FILTERS IN PLACE.
Rev. 06/04
Printed in Mexico
5. Separate the debris screen from the
HEPA filter cartridge by grasping the
debris screen with one hand and the
filter frame with the other and pull
apart. (See illustration below.)
Filter
Chamber
HEPA
Filter
Debris
Screen
6. Vigorously “TapClean”
the HEPA Dust Cup
Filter on a hard surface
until no more dust is
observed falling out from
between the pleats of
the filter. (See illustration
at right.)
CAUTION: The suction hole must be
open, free of any obstructions at all
times. Otherwise, the motor will overheat
and could become damaged.
PLEASE NOTE
: The white pleated
filter material in the HEPA Dust Cup
Filter will discolor over time -This is
NORMAL and will NOT affect the
performance of the filter. If the HEPA
Dust Cup Filter
is properly
"TapCleaned”
after each use
and suction
does not return
to 100%, then
we suggest that
the HEPA filter
be “TapCleaned”
vigorously until no
more dust can be removed, then
rinsed under the faucet and allowed to
dry for 24 hours before refitting into
the vacuum. (Fig. A) This should be
done once a month or when
suction appears reduced.
Fig. A
Wash once a
month or when
suction
appears
reduced.
.
Warning: Allow 24
hours for drying before
replacing in unit.
4. Remove the HEPA Filter from the filter
chamber. (See illustration below.)
5. Separate the debris screen from the
HEPA filter cartridge by grasping the
debris screen with one hand and the
filter frame with the other and pull
apart. (See illustration below.)
Filter
Chamber
HEPA
Filter
Debris
Screen
6. Vigorously “TapClean”
the HEPA Dust Cup
Filter on a hard surface
until no more dust is
observed falling out from
between the pleats of
the filter. (See illustration
at right.)
CAUTION: The suction hole must be
open, free of any obstructions at all
times. Otherwise, the motor will overheat
and could become damaged.
PLEASE NOTE
: The white pleated
filter material in the HEPA Dust Cup
Filter will discolor over time -This is
NORMAL and will NOT affect the
performance of the filter. If the HEPA
Dust Cup Filter
is properly
"TapCleaned”
after each use
and suction
does not return
to 100%, then
we suggest that
the HEPA filter
be “TapCleaned”
vigorously until no
more dust can be removed, then
rinsed under the faucet and allowed to
dry for 24 hours before refitting into
the vacuum. (Fig. A) This should be
done once a month or when
suction appears reduced.
Fig. A
Wash once a
month or when
suction
appears
reduced.
.
Warning: Allow 24
hours for drying before
replacing in unit.
4. Remove the HEPA Filter from the filter
chamber. (See illustration below.)
HEPA
Filter
HEPA
Filter
NOTE: DO NOT OPERATE VACUUM WITHOUT FILTERS IN PLACE.
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.:
866-98shark
www.sharkvac.com
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.:
866-98shark
www.sharkvac.com
Rev. 06/04
Printed in Mexico
2


Need help? Post your question in this forum.

Forumrules
1

Forum

shark-v1510

Reset search

  • How do I buy a new crevice tool for this hand held vacuum? Submitted on 19-6-2021 at 22:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark V1510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark V1510 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Shark V1510

Shark V1510 Additional guide - English - 5 pages

Shark V1510 User Manual - English, French, Spanish - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info