Manual Shark S3200 (page 7 of 8) (English)

668649

Zoom out

Zoom in

1/8

OPERATING INSTRUCTIONS

Components

Indicator Lights: The steam cleaner has

an indicator light located at the base of the

unit that will illuminate when the unit is

plugged into the 120V wall outlet.

Red Light: When the red indicator light

illuminates, this indicates that the power is

“On”.

Green Light: When the green indicator

light illuminates, the steam is ready.

CAUTION: Read the instructions for

“Filling or Refilling Your Steam Cleaner

with Water” before opening the safety filler

cap.

CAUTION: Always unplug before filling.

ALLOW UNIT TO COOL FOR FIFTEEN

(15) MINUTES BEFORE REFILLING.

IMPORTANT: Do NOT add cleaning

solutions, scented perfumes, oils or any

other chemicals to the boiler in this

appliance. Use tap water or

distilled/purified water if the tap water

in your area is very hard.

Attaching the Shoulder Strap

Using the detachable shoulder strap

allows for greater freedom of

movement when both hands are

needed for various cleaning tasks. To

attach the shoulder strap to the steam

cleaner, simply snap the shoulder strap

hooks onto the connecting rings on the

unit body. (Fig. 12)

Using Your Steam Cleaner

After you have assembled the steam

cleaner and are ready to use:

1. When you press the steam trigger it

will lock in place and you will have

continuous steam.

2. To stop the flow of steam, press the

steam trigger release button.

3. When using the unit with the

shoulder strap, avoid rocking or

tilting the unit excessively as this

may cause water to enter the hoes

and be discharged along with the

steam.

Fig. 2

WARNING: Extreme care should be

taken when refilling the unit. Allow unit

to cool for15 minutes before refilling.

When refilling the steam cleaner while the

boiler is still hot, there is a risk that

water will squirt back during filling and

cause scalding. Use caution when

opening the filler cap as the cap may

become hot during use and escaping

steam can cause scalding.

5. To attach the concentrator nozzle or

the steam/garment diffuser to the

nozzle: align the two pins on the end

of the concentrator nozzle or

steam/garment diffuser with the

notches in the nozzle of the unit.

(Fig. 2)

6. Push the attachment into the nozzle

unit it stops against the unit. Turn

clockwise ¼ turn to lock the

attachment into place. Allow

approximately 5 minutes for vapor

to reach its working temperature and

pressure. When the unit is ready for

use, the green indicator light will

illuminate. Always point the nozzle in

a safe direction. At the start, some

water will come out from the nozzle.

This is normal.

NOTE: When the steam cleaner has run

out of water, steam output will cease.

CAUTION: This appliance is under

pressure. After every use, press steam

trigger button until all pressure has been

released before removing safety cap. Allow

unit to cool for fifteen (15) minutes before

refilling.

Unit

Nozzle

Steam/Garment

Diffuser

Fig. 1

Connecting

points

Connecting

points

Filling or Refilling Your Steam

Cleaner With Water

Fig. 12

IMPORTANT: Always insure that the unit

is “UNPLUGGED” from the wall receptacle

prior to initial filling or re-filling the water

tank and has been allowed to cool. Never

attempt to fill this unit under a water tap,

always use the measuring cup and

funnel provided.

IMPORTANT: When using the

steam cleaner with the shoulder

strap, avoid rocking or tilting the unit

excessively as this may cause water

to enter the hose and be discharged

along with the steam.

1. Before filling or refilling the steam

cleaner, make sure that the unit is NOT

plugged in and has been allowed to cool

for fifteen (15) minutes.

2. Press the locking steam trigger on the

handle of the unit to vent any residual

steam that is in the boiler.

3. Place the unit on a flat, stable surface.

Slowly, press and turn the filler cap

counter clockwise until it is removed.

4. Place the funnel in the tank opening.

(Fig. 1) Fill with a maximum of one filling

flask or 9.5 oz (280 ml) of water. Do Not

Overfill. Turn the safety cap clockwise

to replace.

NOTE: To remove or replace the filler cap,

push down and rotate it clockwise to tighten

or counter clock-wise to loosen.

NOTE: Filling the unit with hot water will

shorten the heat up time.

8 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark S3200 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark S3200 Manual

Product: