743716
11
Zoom out
Zoom in
Previous page
1/15
Next page
sharkclean.comsharkclean.com
REPLACEMENT PARTS: ROBOT REPLACEMENT PARTS: BASE
REPLACEMENT PARTS
Filter
Multi-Surface
Brushroll
Side Brushes
Robot Dust Bin
Brushroll
Door
Battery
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
Replacement
Post-Motor Filter
TROUBLESHOOTING
MAINTENANCE
If any error lights are illuminated or flashing on your Shark iQ Robot®, see the error code
chart below:
For all other issues, please call Customer Service at 1-888-228-5531.
CAUTION: Turn o power before performing any maintenance.
ERROR CODE
ERROR
NUMBER
SOLUTION
CLEAN (RED) flashing
10
Robot may be stuck on an obstacle. Move robot to a new
location on a level surface.
DOCK (RED) flashing
6
Front bumper may be jammed. Clean the bumper and
make sure it moves in and out freely.
CLEAN (BLUE) + DOCK (RED) solid
14
BotBoundary® error. Move your robot to a flat surface
away from the magnetic boundary strip and try cleaning
again.
CLEAN (RED) + DOCK (BLUE) flashing
7
Cli sensor error. Move your robot to a new location and
clean its cli sensors.
CLEAN (RED) + DOCK (RED) flashing
9
Robot dust bin needs to be reinstalled. Insert the dust bin
until it clicks in place.
DOCK (RED) + ! (RED) flashing
2
Side brush is stuck. Remove any debris from around the
side brushes so they move freely.
CLEAN (RED) + DOCK (RED) + ! (RED) flashing
2
A drive wheel is stuck. Clean the wheels and remove any
debris wrapped around the axles so they can move freely.
CLEAN (RED) + DOCK (BLUE) alternating
16
Robot is stuck. Move your robot to a new location and
make sure the front bumper moves in and out freely.
CLEAN (BLUE) + ! (RED) flashing
2
Blockage in brushroll. Remove any debris from around the
brushroll so that it can spin freely.
CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing
21
Robot has encountered an error while booting. Please turn
the power o and back on.
CLEAN (BLUE) + DOCK (RED) flashing
23
Make sure your base indicator light turns blue to confirm
your robot is placed on the base correctly.
BATTERY ICON (RED) flashing
24
Battery is critically low and needs recharging. Please
pick up your robot and place it on the base. Make sure
the base indicator light turns blue to conrm your robot
is placed on the base correctly.
CLEAN (RED) + ! (RED) alternating
2
Blockage in brushroll. Remove any debris from around
the brushroll so that it can spin freely.
DOCK (RED) FLASHING + ! (RED) solid
26
Blockage in dust bin. Check base and robot dust bin for
clogs. Clear any debris and reinstall the dust bin, ensuring
that it clicks into place.
DOCK (BLUE) + ! (RED) flashing
24
Robot has encountered an error while charging. Please
make sure you are using the correct power cord for the
base.
CLEAN (RED) + ! (RED) flashing
3
Suction motor failure. Remove and empty the dust bin,
clean the filters, and remove blockages.
CLEAN (BLUE) + DOCK (RED) + ! (RED) flashing
2
Wheel motor encoder failure. Please contact Shark
Customer Service at 1-888-228-5531.
Base Dust Bin
Self-Empty Base
Pre-Motor Foam &
Felt Filter Kit
11


Need help? Post your question in this forum.

Forumrules
1

Forum

shark-iq-robot-av1010ae-series

Reset search

  • One of the little brushes fell off. I have the brush but what holds it ther is missing, how do i get another to replace Submitted on 27-4-2024 at 03:31

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark IQ Robot AV1010AE Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark IQ Robot AV1010AE Series in the language / languages: English as an attachment in your email.

The manual is 3,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info