743690
11
Zoom out
Zoom in
Previous page
1/15
Next page
sharkclean.comsharkclean.com
REPLACEMENT PARTS: ROBOT REPLACEMENT PARTS: BASE
REPLACEMENT PARTS
Filter
RVFFK950
Self-Cleaning
Brushroll
103KY1000
Side Brushes
102KY1000
Robot Dust Bin
101KY1000AE
Base Dust Bin
104KY1000AE
Brushroll
Door
109KY1000
Battery
RVBAT850
Power Cord
ADAP1000AE
Self-Empty Base
XSKAEDOCK
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
Pre-Motor Foam &
Felt Filter Kit
106KY1000AE
Replacement
Post-Motor Filter
107KY1000AE
TROUBLESHOOTING
MAINTENANCE
If any error lights are illuminated or flashing on your Shark iQ Robot®, see the error code
chart below:
ERROR CODE SOLUTION
CLEAN (RED) flashing
Robot may be stuck on an obstacle. Move robot to a new location
on a level surface.
DOCK (RED) flashing
Front bumper may be jammed. Clean the bumper and make sure it
moves in and out freely.
CLEAN (BLUE) + DOCK (RED) solid
BotBoundary® error. Move your robot to a flat surface away from
the magnetic boundary strip and try cleaning again.
CLEAN (RED) + DOCK (BLUE) flashing
Cli sensor error. Move your robot to a new location and clean its
cli sensors.
CLEAN (RED) + DOCK (RED) flashing
Robot dust bin needs to be reinstalled. Insert the dust bin until it
clicks in place.
DOCK (RED) + ! (RED) flashing
Side brush is stuck. Remove any debris from around the side
brushes so they move freely.
CLEAN (RED) + DOCK (RED) + ! (RED) flashing
A drive wheel is stuck. Clean the wheels and remove any debris
wrapped around the axles so they can move freely.
CLEAN (RED) + DOCK (BLUE) alternating
Robot is stuck. Move your robot to a new location and make sure
the front bumper moves in and out freely.
CLEAN (BLUE) + ! (RED) flashing
Blockage in brushroll. Remove any debris from around the brushroll
so that it can spin freely.
CLEAN (RED) + DOCK (BLUE) + ! (RED) flashing
Robot has encountered an error while booting. Please turn the
power o and back on.
CLEAN (BLUE) + DOCK (RED) flashing
Make sure your base indicator light turns blue to confirm your robot
is placed on the base correctly.
BATTERY ICON (RED) flashing
Battery is critically low and needs recharging. Please pick up
your robot and place it on the base. Make sure the base indicator
light turns blue to confirm your robot is placed on the base
correctly.
CLEAN (RED) + ! (RED) alternating
Blockage in brushroll. Remove any debris from around the
brushroll so that it can spin freely.
DOCK (RED) FLASHING + ! (RED) solid
Blockage in dust bin. Check base and robot dust bin for clogs. Clear
any debris and reinstall the dust bin, ensuring that it clicks into place.
DOCK (BLUE) + ! (RED) flashing
Robot has encountered an error while charging. Please make sure
you are using the correct power cord for the base.
CLEAN (RED) + ! (RED) flashing
Suction motor failure. Remove and empty the dust bin, clean the
filters, and remove blockages.
CLEAN (BLUE) + DOCK (RED) + ! (RED) flashing
Wheel motor encoder failure. Please contact Shark Customer
Service at 1-888-228-5531.
For all other issues, please call Customer Service at 1-888-228-5531.
CAUTION: Turn o power before performing any maintenance.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark IQ Robot - RV1000AE Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark IQ Robot - RV1000AE Series in the language / languages: English as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info