668686
5
Zoom out
Zoom in
Previous page
1/6
Next page
OPERATING INSTRUCTIONS cont.
PRECAUTIONARY MEASURES
4. Take the HEPA dust cup filter out of
the dust cup, do not let the dust fall
out.
5. Take out the dust cup and dispose of
the dust inside.
HEPA Dust
Cup Filter
Dust Cup
Cleaning & Changing the
HEPA Dust Cup Filter (cont.)
Important: If the suction opening in the unit, the hose or the extension tube are
BLOCKED
, switch off the vacuum cleaner and remove the blocking substance before
you start the unit again.
9. Reassemble the debris screen to the
HEPA filter cartridge and replace into
dust cup (container). Ensure that the
filter assembly is completely seated
inside the dust cup (container).
1. Do not operate the vacuum
cleaner to close to heaters,
radiators or cigarette butts.
4. When pulling out the power plug
from the wall outlet, pull the plug
not the power cord.
10.Attach the dust cup (container) to the
vacuum.
5. Do not pick up anything that is
burning or smoking such as
cigarettes, matches or hot ashes.
2. Before inserting the power plug
into the wall outlet, make sure that
your hands are dry.
Fig. A
Warning: Allow 24
hours for drying before
replacing in unit.
PLEASE NOTE: The white pleated
filter material in the HEPA Dust Cup
Filter will discolor over time -This is
NORMAL and will NOT affect the
performance of the filter. If the HEPA
Dust Cup Filter
is properly
"TapCleaned”
after each use
and suction
does not return
to 100%, then
we suggest that
the HEPA filter
be “TapCleaned”
vigorously until no
more dust can be removed, then
rinsed under the faucet and allowed to
dry for 24 hours before refitting into
the vacuum. (Fig. A) Wash once
a month or when suction appears
reduced.
Wash once
a month or
when
suction
appears
reduced.
6. Do not use without dust cup filter or
filters in place.
Note: This vacuum cleaner is equipped
with a plug and power cord that retract
automatically. If the cord or plug get
damaged, it must be replaced by a
qualified technician.
HEPA Filter Debris Screen
6. Separate the debris screen from the
HEPA filter cartridge by grasping the
debris screen with one hand and the
filter frame with the other and pull
apart.
3. Before you start vacuuming,
make sure to remove large or
sharp objects that might
damage the dust bag.
Warning: Hold the plug when
rewinding the cord. Do not allow the
cord to whip
when rewinding.
7. Vigorously
“TapClean” the HEPA
Dust Cup Filter on a
hard surface until no
more dust is observed
falling out from
between the pleats of
the filter.
CAUTION: The suction hole must be
open, free of any obstructions at all
times. Otherwise, the motor will overheat
and could become damaged.
8. “TapClean” the Debris
Screen or rinse under
a faucet until clean.
Remember that
the Debris Screen
must be completely
dry before reinstalling
in the vacuum.
5
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark Euro Pro - EP79 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark Euro Pro - EP79 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info