Manual Shark AZ2002 Vertex (page 5 of 25) (English, French, Spanish)

743298

Zoom out

Zoom in

1/25

sharkclean.comsharkclean.com

EMPTYING THE DUST CUP

To remove Dust Cup, press release button on

top of the pod. Tilt dust cup away from wand,

then lift to remove.

To reinstall, place bottom of dust cup into

pod and then tilt until it clicks into place.

To empty debris into trash, press lower release

button and bottom of dust cup will drop open.

To remove collected debris from Lint Screen,

press top release button and lift handle to

access screen.

CLEAN HEPA FILTER EVERY YEAR

With the dust cup removed, press button on Filter Door. Pull forward and slide out to remove,

then take out HEPA Filter.

To reinstall, insert HEPA ﬁlter into unit and replace ﬁlter door.

CLEAN PRE-MOTOR FILTERS

EVERY MONTH

Remove Dust Cup, then lift out Filters.

Regularly rinse and replace the ﬁlters to

maintain your vacuum’s suction power.

To prevent damage from cleaning chemicals,

rinse ﬁlters with cold water only. Allow all

ﬁlters to air-dry for at least 24 hours before

reinstalling them to prevent liquid from being

drawn into electric parts.

CLEANING AND REPLACING THE FILTERS

CLEANING FILTERS

IMPORTANT: DO NOT use soap when

cleaning the ﬁlters.

IMPORTANT: Unplug the power cord before performing any maintenance.

Filter

Door

Release

NOTE: The pre-motor ﬁlters should be replaced every 2.5 years. The post-motor ﬁlter should be replaced every 3 years.

Filter

Filter Door

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark AZ2002 Vertex in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark AZ2002 Vertex Manual

Product: