759471

Sencor SVC 9000 Manual

7
Zoom out
Zoom in
Previous page
1/7
Next page
- 7 - 06/2019
Copyright © 2019, Fast ČR, a.s.
■Release the clip A6 and tilt open the lid A4. When tilted open, the lid A4 will be
locked in the open position. Remove the used dust bag A18 from the holder A19
and insert anew bag of the same type in its place. After replacing the bag A18, close
the lid A4. The vacuum cleaner is equipped with asafety mechanism that prevents
the lid A4 from being closed unless the bag is correctly inserted in the holder A19
or when it is not inserted at all.
■If the dust bag is not replaced in time, the vacuum cleaner’ssuction power will be
reduced.
Cleaning and replacing the inflow and outflow filters
■Release the clip A6 and tilt open the lid A4. When tilted open, the lid A4 will be
locked in the open position. Release the clip located in the top part of the grill A20
and tilt open the grill A20. Take the inflow filter A21 out of it and tap it out away
from living areas. Then reinsert it and close the lid A4. In the event that the filter A20
shows signs of wear, or is heavily soiled, replace it with anew one.
■Release the clip located in the top part of the grill A16 and take the grill A16 out
of the vacuum cleaner. Take the filter A17 out of the grill A16. Now press the clip
located on the right side of the HEPA filter A15 frame, and take the HEPA filter A15
out of the vacuum cleaner. After removing both filters A17 and A15, tap them out
away from living areas. In the event of greater soiling, wash filter A17 in lukewarm
water. Wash the HEPA filter A15 under aweak current of running lukewarm water
so that the water washes the dirt out of the folds. Allow both filters A17 and A15 to
dry naturally. Then insert them back in their place. It is recommended to replace the
HEPA filter A15 with anew one after 6 months of use.
Attention:
Before putting the filters back into the vacuum cleaner, make
sure that they are completely dry.
■When filters are soiled, their effectiveness is reduced, so do not neglect their regular
cleaning.
Cleaning the flexible hose, telescopic tube, combination floor nozzle, hard floor
nozzle, turbo brush, mini turbo brush, flexible crevice nozzle, small crevice
nozzle and the dusting brush
■If the accessories are soiled, remove them from the vacuum cleaner and clean all dirt
off of them (dust, hair, animal fur, etc.).
■To make the removal of hair that is wound on to the rotary brush of the turbo brush
A28 or the mini turbo brush A29 easier, you may cut it away with scissors.
Cleaning the outer surface of the vacuum cleaner
■Clean the outer surface using a dry or a lightly dampened cloth. Then wipe it
thoroughly dry.
■For cleaning the vacuum cleaner, do not use steel wool, abrasive cleaning products,
solvents etc.
■Do not submerge the vacuum cleaner under water or any other liquid and do not
rinse it under running water.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................ 220−240 V
Rated frequency........................................................................................................................50/60 Hz
Rated power input ........................................................................................................................ 800 W
Electrical shock protection class ....................................................................................................... II
Noise level ...................................................................................................................................69dB(A)
Dust bag capacity...................................................................................................................................4l
HEPA filter efficiency class ..............................................................................................................H13
Length of the power cord ........................................................................................................... 11 m
Operational radius .......................................................................................................................... 14 m
The declared noise emission level is 69dB(A), which represents alevel A of sound
power with respect to areference sound power of 1pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
We reserve the right to change text and technical specifications.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand
over these appliances to determined collection points. Alternatively,
in some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 9000 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info