Manual Sencor SVC 8936 (page 8 of 9) (English)

759493

Zoom out

Zoom in

1/9

EN Cordless vacuum cleaner

User’smanual

CORDLESS VACUUM CLEANER

Prior to using this appliance, please read the user’smanual thoroughly, even in cases

where you have previously familiarised yourself with the operation of similar types of

appliances. Only use the appliance in the manner described in this user’smanual. Keep

this user’smanual in asafe place where it can be easily retrieved for future use.

We recommend saving the original cardboard box, packaging material, and purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event of

transportation, we recommend that you pack the appliance in the original box from

the manufacturer.

DESCRIPTION OF THE VACUUM CLEANER AND ITS ACCESORIES

A1 Vacuum cleaner handle

A2 On/off button of the vacuum

cleaner

A3 Suction level button of the

vacuum cleaner

A4 Connecting cable (located in the

joint between the handle and the

body of the vacuum cleaner)

A5 Vacuum cleaner body

A6 LED indicators of charging and

battery level

A7 Dust container release button

A8 Dust container

A9 Floor nozzle release button

A10 Floor nozzle with an electric rotary

brush

A11 Washable external filter

A12 Washable internal HEPA type filter

A13 Power adapter charging socket

A14 Power adapter

A15 Hook for hanging the vacuum

cleaner

A16 Wall mount holder set (mount

required)

DESCRIPTION OF THE MOP ATTACHMENT

I1 Mop attachment

I2 Tank for water / solution with

cleaning detergent

I3 Filling outlets

I4 Removable Velcro mop cover

I5 Surface to attach the mop cover (at

the bottom of the attachment, not

shown)

I6 Removable panel with nozzles (at

the bottom of the attachment, not

shown)

BEFORE FIRST USE

Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers. Check that neither the appliance nor

any of its parts is damaged.

ASSEMBLY AND DISASSEMBLY

Due to the safety reasons during the transport, the vacuum cleaner is delivered

disassembled. When assembling, please follow these steps (see also the process in the

picture B).

1. Connect the handle A1 to the vacuum cleaner body A5 so that the connecting cable

A4 is inside the connection. Secure the connection with the supplied screw.

2. Connect the floor nozzle A10 to the bottom part of the vacuum cleaner body A5.

The correct connection of the floor nozzle A10 is indicated by a click sound of

button A9.

3. In the end, insert the dust container A8 into the vacuum cleaner body A5. At first,

insert the bottom part of the dust container A8 at the angle of 30° in the vacuum

cleaner body A5 and then carefully attach the upper part of the dust container A8.

The correct attachment of the dust container A8 is indicated by aclick sound.

To dissemble, proceed in reverse sequence.

PARKING POSITION OF THE VACUUM CLEANER

Put the vacuum cleaner into the parking position by placing the tip of your foot on

the top of the floor nozzle A10 and with asimply forward movement of the handle

A1 secure the vacuum cleaner in the vertical position. The latch located at the front

of the elbow of the floor nozzle A10 will slide into the groove on the top cover of the

floor nozzle A10.

To release the vacuum cleaner from the parking position, place the tip of your foot on

the top of the floor nozzle A10 and tilt the hand A1 backwards. The latch located at

the front of the elbow of the floor nozzle A10 will slide out of groove on the top cover

of the floor nozzle A10.

CHARGING THE VACUUM CLEANER

Connect the connector of the power adapter A14 to the socket A13 and insert the

plug of the power adapter into the power socket.

Note:

Before charging, it is important the vacuum cleaner has been turned off

and has been tilted in the upright position. Do not turn on the vacuum

cleaner if it is being charged and the power adapter A14 is plugged in

the power outlet.

Once the adapter A14 has been inserted into the power socket, the vacuum cleaner

will switch to charging mode and LED indicators A6 will signal the power level. Afull

charge requires approximately 6 - 8 hours. The actual charging time depends on the

power level of the battery.

Once the charging process is complete, all LED indicators A6 will be lit. Disconnect the

power adapter A14 from the power socket.

Note:

This vacuum cleaner contains abuilt-in Li-ion battery. To ensure

the longest possible lifetime of the battery, we recommend:

- Do not unnecessarily leave the battery fully charged or

completely flat for too long.

- Do not keep the battery permanently fully charged. Its lifetime

will be extended by keeping it at approximately half charge.

- Do not fully discharge the battery.

USING THE VACUUM CLEANER

You may use the vacuum cleaner for vacuuming various types of floor coverings such

as for example hard floor coverings, carpets, etc.

Hold the vacuum cleaner by the handle A1 and release it from the parking position.

After releasing it from the parking position, the handle may be moved in the vertical

direction.

Start the vacuum cleaner by pressing button A2. The vacuum cleaner will run at the

full suction power. If you need to decrease the suction power, press the button A3. The

suction power of the vacuum cleaner will be decreased. Pressing the button A3, you

will increase again the suction power.

When you have finished using the vacuum cleaner, press the button A2 to turn it off.

Clean it according to the instructions in chapter “Cleaning and maintenance” and allow

it to charge according to the instruction in chapter “Charging the vacuum cleaner”.

Note:

The LED indicators A6 signal the batter power level. The

individual LED indicators will turn off as the battery gradually

discharges. If it is discharged fully, all LED indicators A6 will flash

and the vacuum cleaner will stop running.

If the rotary brush gets blocked while using, e.g. vacuuming larger amount of hair

or animal fur, the system will activate the automatic safety protection that stops the

rotary brush to protect it against damage. All LED indicators A6 will flash for about

10 seconds. Turn off the vacuum cleaner by pressing the button A2 and remove

the jammed hair or animal fur from the rotary brush – more information in chapter

“Cleaning and maintenance”. Before turning the vacuum cleaner on again, ensure the

rotary brush, dust container A8 and filters A11 and A12 are clean.

MOUNTING THE WALL HOLDER

Before mounting the wall holder on awall, it is important that you check that the

installation location has no wires, conduits, pipes, etc. in the wall.

Warning:

Only use the supplied set of screws and dowels for the

installation. Under no condition should dowels and screws be

used that have adifferent diameter, different specifications and

which are not approved by the manufacturer as suitable for the

installation of this type of product.

1. Place the wall holder on the wall at the appropriate height and mark the points by

apencil where the holder will be situated – see picture C.

2. Drill three holes according to the marking.

3. Insert the supplied dowel into each hole.

4. Now, place the holder on the wall and secure it by screws. Ensure they are correctly

screwed.

5. Release the handle A1 from the vacuum cleaner body A5 and from below, slide the

hanging hook A5 on the back part of the handle A1 – see picture D. The correct

position of the hook A15 is indicated by aclick sound. Attach the handle A1 back to

the vacuum cleaner body A5.

6. Lift the vacuum cleaner and place it to the holder so that the hook A15 is aligned

with the groove in the holder. Carefully slide the hook A15 into the holder groove –

see picture E. Ensure the vacuum cleaner is securely fixed in the holder.

USING THE MOP ATTACHMENT

Attach the mop cover I4 to the surface I5. Place the mop attachment I1 with the

attached mop cover I4 on the ground. Fill in the tank I2 by water or solution with the

cleaning detergent. Avoid spilling water / solution from the filling outlets I3 of the tank

I2. Place the vacuum cleaner above the mop attachment I1 so that the projections on

the attachment I1 were aligned with the holes at the bottom part of the floor nozzle

A10. Wheels should fit in the construction of the attachment I1 - see picture J. Slightly

push the vacuum cleaner down until you hear aclick sound. That signalizes the correct

securing of the attachment I1 to the floor nozzle A10. Turn on the vacuum cleaner,

and meanwhile you vacuum, the wheels will push on the switches in the attachment

I1, these will release water / solution through the panel I6 into the mop cover I4 which

will wipe the floor.

Note:

Regularly check the level of water / solution in the tank I2 and fill it

in if needed.

If you no longer use the mop attachment I1, pull up the vacuum cleaner. The switches

in the attachment I1 will be automatically released and water / solution stops flowing.

CLEANING AND MAINTENANCE

Before cleaning, always make sure that the vacuum cleaner is turned off and the power

adapter is disconnected from the power socket. We recommend running the cleaning

and maintenance after each use to prolong the lifetime of your vacuum cleaner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 8936 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SVC 8936 Manual

Product: