Manual Sencor SVC 8505 (page 6 of 7) (English)

759479

Zoom out

Zoom in

1/7

05/2019

- 6 -

EN Bagged Vacuum Cleaner

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user’smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE VACUUM CLEANER AND ITS ACCESSORIES

A1 Automatic power cord winding

button

A2 Stainless steel grill

A3 Electronic suction power control

A4 Lid of storage area for dusting brush

and crevice nozzle

A5 Full dust bag indicator

A6 Lock for lid of storage area

A7 Flexible hose connection hole

A8 Top cover lock

A9 Integrated handle

A10 On/Off button of the vacuum

cleaner

A11 Groove for the horizontal parking

position

A12 Rubber-coated rear travel wheel

A13 Front rotating travel wheel

A14 Groove for the vertical parking

position

A15 Removable grill of the outflow HEPA

filter

A16 Washable outflow HEPA filter

is placed behind the grill.

A17 Dust bag*

A18 Dust bag holder

A19 Grill of the inflow micro-filter

A20 Washable inflow micro-filter

is placed in the grill.

A21 Flexible hose with an integrated

brush

A22 XXL telescopic metal tube

A23 Floor nozzle with an extensible

brush and DEEP cleaning and EASY

cleaning switch

A24 Flap for extending and retracting

the brush

A25 Turbo brush

A26 Suction power control

A27 Hard floor nozzle

A28 Mini turbo brush

A29 Long flexible crevice nozzle

A30 Dusting brush

A31 Crevice nozzle

*Note:

One disposable synthetic dust bag is included with the product.

Synthetic dust bags last longer, are more durable and provide better

filtration than standard paper bags.

Note:

The dusting brush A30 and crevice nozzle A31 are stored in the storage

area under the lid A4.

INTENDED USE OF THE ACCESSORIES

■ The universal floor nozzle with an extensible brush A23 is intended for all floor

types. Extend the brush when vacuuming smooth hard floors, and retract it when

vacuuming carpets. To extend and retract the brush, use flap A24 on the floor

nozzle A23. Floor nozzle A23 also has aswitch for extending out atravel roller. This

switch is located in the centre of the floor nozzle A23 and it has two positions - deep

cleaning and easy cleaning. The deep cleaning position (the travel roller is retracted)

is ideal for deep and thorough vacuuming of carpets. The easy cleaning position

(the travel roller is extended) makes movement over the vacuumed surface easier.

We recommend to slightly lift up the floor nozzle A23 when you wish to switch to

the easy cleaning position.

■ The turbo brush A25 is suitable for vacuuming smooth hard surfaces and carpets

with alow pile height. Thanks to the rotating brush, it very quickly and effectively

removes ingrained dirt, threads, animal fur, hair, etc. Use the sliding suction power

control A26 to set the suction intensity.

■ The hard floor nozzle A27 ensures perfect and yet gentle vacuuming of smooth

hard surfaces thanks to the brush being from 100% natural bristles. It can be used

to vacuum floors that are sensitive to scratching such as wooden or floating floors,

marble floors, tiles, linoleum, etc.

■ The mini turbo brush A28 is the ideal helper for removing animal fur, hair, etc.,

while at the same time being suitable for vacuuming hard-to-reach places. Its use

is not limited to the home, and can be used for vacuuming the car. It quickly and

effectively removes hair, animal fur and other materials from car seats, upholstery,

pillows and other textile surfaces.

■ The long flexible crevice nozzle A29 serves to vacuum very hard-to-reach places

anywhere in your car.

■ The crevice nozzle A31 can be used for vacuuming hard-to-reach places and the

dusting brush A30 is used for vacuuming various types of furniture.

PREPARING FOR USE

■ Make sure that the dust bag A17, inflow micro-filter A20 and outflow HEPA filter

A16 are properly installed.

■ Insert the end of the flexible hose A21 into the hole A7 and turn it clockwise to

secure it in place.

Note:

For removal, turn the end of the hose A21 anticlockwise and pull it out

of the hole A7.

■ Attach the telescopic tube A22 on to the handle of the flexible hose A21. Slide the

ring that is located on the telescopic tube A22 towards the handle of the flexible

hose A21 to release the extension lock on the telescopic tube A22. After releasing

the lock, set the length of the tube A22 by sliding its extensible part in or out. When

the ring is released, it will lock in at the set length.

■ Select the type of accessory that you wish to use and attach it to the free end of the

telescopic tube A22. Certain types of accessories such as for example A28, A29, A30

or A31 are attached directly on to the handle of the flexible hose A21.

USING THE VACUUM CLEANER

■ Pull on the power plug to wind out the required length of the power cord and

connect it to apower socket.

Attention:

The yellow mark on the power cord indicates the approaching

end of its length, and the red mark indicates the complete end of

its length. Do not attempt to pull the power cord past this mark.

■ To start the vacuum cleaner, press button A10. Suction power can be set using the

electronic control A3 or the mechanical flap on the handle of the flexible hose A21.

■ When you have finished using the vacuum cleaner, turn it off by pressing button

A10 and disconnect the power cord from the power socket. To wind the power cord

back into the vacuum cleaner, press and hold button A1 until its entire length is

wound up. Gently hold the power cord with one hand while winding it up.

Note:

If the power cord is not wound up completely, release button A1, and

pull the power cord out of the vacuum cleaner by approximately 50 cm

and then try again to wind it up.

PARKING POSITION OF THE VACUUM CLEANER

■ When not using the vacuum cleaner, you may put it in the parking position. For the

horizontal parking position, slide the stopper on the nozzle A23 or A27 or turbo

brush A25 into the groove A11, see fig. B1.

■ For the vertical parking position, first set the shortest length of the telescopic tube

A22. Then put the vacuum cleaner into avertical position and slide the stopper on

the nozzle A23 or A27 or the turbo brush A25 into the groove A14, see fig. B2.

MAINTENANCE AND CLEANING

■ Before cleaning it, always make sure that the vacuum cleaner is turned off and

disconnected from the power socket.

Changing the dust bag

■ The red coloured indicator A5 signals the need to replace the dust bag A17.

■ Release the lock A8 and tilt open the top cover of the vacuum cleaner. Remove the

used dust bag A17 from the holder A18 and insert anew bag intended for this type

of avacuum cleaner in its place. After replacing the bag A17, close the top cover

of the vacuum cleaner. It will not be possible to close the top cover of the vacuum

cleaner unless the bag is correctly inserted in the holder A18.

■ If the dust bag is not replaced in time, the vacuum cleaner’ssuction power will be

reduced.

Cleaning and replacing the inflow micro-filter and the outflow HEPA filter

■ Release the lock A8 and tilt open the top cover of the vacuum cleaner. Slide the grill

A19 out of the vacuum cleaner and take the micro-filter A20 out of it. Rinse it under

running lukewarm water and allow to dry naturally. Then reinsert it and close the

cover. In the event that the micro-filter A20 is showing signs of wear or it is heavily

soiled, replace it with anew one.

■ Release and remove the grill A15. Remove the HEPA filter A16 from the vacuum

cleaner. In the case of light soiling, tap it out. We recommend doing this away from

living areas. In the event of greater soiling, wash it under aweak current of running

lukewarm water so that the water washes the dirt out of the folds. Allow the HEPA

filter A16 to dry naturally, then reinsert it and secure it in place with the grill A15.

It is recommended to replace the HEPA filter with anew one after 6 months of use.

■ When filters are soiled, their effectiveness is reduced, so do not neglect their

cleaning.

Attention:

Before putting the filters back into the vacuum cleaner, make

sure that they are completely dry.

Cleaning the flexible hose, telescopic tube, floor nozzle, hard floor nozzle, mini

turbo brush, flexible crevice nozzle, small crevice nozzle and the dusting brush

■ If the accessories are soiled, take them out and clean away all dirt (dust, hair, animal

fur, etc.).

Cleaning the turbo brush

■ Release the latches along the sides of the turbo brush A25, see figure C1. Remove

the front cover and remove all dirt, hair, animal fur, etc. from the rotary brush and

the inner area. After cleaning, put the front cover back and secure it in place using

the locking latches.

■ Press the cover latches located on the underside of the turbo brush A25 to release

them, see figure C2. Remove the cover and remove any soils from the inner area of

the turbo brush A25. Put the cover back in its place. An audible click will be heard

when it slides back into place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 8505 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SVC 8505 Manual

Product: